MI 3309 DeltaGT
Autotest sequences
50
6 Autotest sequences
Autotest is the fastest and easiest way to test appliances. During the autotest, pre-
programmed measurements run automatically in a sequential order. The complete
autotest results can be stored together with the associated appliance ID and appliance
NAME.
6.1 VDE organizer setup menu
Select VDE Organizer in Main menu.
In the first step the appliance type, protective measures and additional protection should
be set.
Appliance types
are:
General;
Appliances
with
heating elements.
IEC leads, multiple outlets without electronic parts;
Protective
measures
are:
Accessible conductive part is connected to protective conductor (Class I principle);
Accessible conductive part is protected by isolation (Class II principle) or SELV /
PELV measures;
Combined Class I and Class II / SELV / PELV measures;
There are no accessible conductive parts;
Device is a Class III device.
Additional protection
:
Additional
protection
is
provided by (portable) RCDs;
No additional protection.
Figure 6.1: Selection of appliance type and protective measures
Keys:
/
Selects Organizer option. Selected option is highlighted.
ESC
Cancels VDE sequence and returns to Main menu.
TEST
Confirms selection and proceeds to next step.
After the appliance type and means of protection are set the appropriate test sequence
can be started.
