MI 3309 DeltaGT
Instrument description
15
The instrument detects a serious failure. Switch OFF the
instrument. Disconnect all cables and leads. Switch ON
the instrument again.
Return the instrument to the repair
centre if the message is displayed again.
WARNING
!
A high voltage will be present on the output of the
instrument!
WARNING!
A high insulation test voltage is present on the output of
the instrument.
Measurement is in progress.
Test result can be saved.
Connect the test lead to the S/EB test terminal.
Flex the mains cable of appliance during the test.
Check that the device under test is switched on (to ensure
that the complete circuit is tested).
Connect the cord to be tested to the IEC test terminal.
Test passed.
Test failed.
Measurement was aborted due to improper conditions
during the test.
RCD must be switched on.
Change position of mains cord before RCD test.
Indicate which connection in the test socket is over the
limit. (blank contact - under limit, filled contact - over limit)
2.4.1 Battery indication
The indication shows the charge condition of battery and connection of external charger.
