MI 3309 DeltaGT
Autotest sequences
55
Figure 6.15: VDE Organizer – Substitute leakage - P starting screen
There are no special options in the Substitute leakage - P starting screen.
Figure 6.16: VDE Organizer – Substitute leakage - P result screen
Options in Substitute leakage - P result screen:
NEXT
Proceeds with the next measurement.
REPEAT
Repeats the test (use in case of multiple isolated / SELV / PELV
accessible points). Highest result will be stored.
6.1.1.10 Touch leakage measurement
The measurement is described in chapter
5.2.9 Touch Leakage.
Figure 6.17: VDE Organizer – Touch leakage starting screen
There are no special options in the Touch leakage - starting screen.
Figure 6.18: VDE Organizer – Touch leakage result screen
Options in Touch leakage result screen:
NEXT
Proceeds with the next measurement.
REPEAT
Repeats the test (use in case of multiple isolated / SELV / PELV
accessible points). Highest result will be stored.
6.1.1.11
RCD test
This test is offered if it is applicable according to the VDE Organizer setting.
The measurement is described in chapter
5.2.10 (P)RCD test.
Options in VDE organizer starting screen:
NO
To be set if RCD test is not applicable.
RCD
To be set if RCD test is applicable.
