MI 3309 DeltaGT
Main menu and test modes
28
Keys:
/
Switches between Instrument data screens.
TEST,
ESC
Returns to
Setup menu.
4.8.8 Initial settings
In this menu the following instrument parameters can be set to their initial values:
all measurement parameters in single test mode;
LCD
settings;
language;
communication
settings;
custom autotest sequences are replaced by factory pre-programmed ones.
Figure 4.17: Initial settings menu
Keys:
TEST
Confirms selection and returns to
Main menu.
ESC
Returns to
Setup menu
without changes.
4.8.9 Communication port
In this menu the communication parameters can be set.
setting the USB or RS232 port for communication with PC.
setting the baud rate.
Figure 4.18: Communication menu
Keys:
TAB
Switches between options
.
/
Selects the active communication port / Selects baud rate.
TEST
Confirms selection and returns to
Setup menu.
ESC
Returns to
Setup menu
without changes.
Note:
RS232 communication port and 9600 bps baud rate should be selected for
communication with barcode reader, RFID reader/writer or printer.
