MI 3309 DeltaGT
Autotest sequences
57
6.2 Custom autotest
In the autotest custom menu user-defined autotest procedures can be performed via the
PC SW PATLink PRO. Up to 50 custom autotest sequences can be pre-programmed in
this autotest mode.
Commonly used pre-programmed autotest sequences are added to the list by default.
The custom sequences can be also uploaded from the PC via PC SW PATLink PRO.
Refer to chapter
8 Communication
for more information.
New custom sequences can be also uploaded from the VDE Organizer.
Refer to chapter
7 Working with autotest results
for more information.
The pre-programmed sequences can be restored to default sequences by selecting
Initial
settings
in
Setup menu
.
Select Custom Autotest function in Main menu.
Figure 6.22: Custom autotest menu
Keys:
/
Selects the custom autotest.
START
Starts the selected custom autotest. See chapter
6.5 Carrying out
autotest sequences (Code, Simple and Custom)
.
ESC
Returns to Main menu.
Note:
If more than 50 autotests are saved, »
Out of custom autotest memory
« message
is displayed.
6.3 Simple test
Simple test sequences are commonly used pre-programed autotest sequences with
possibility of fast testing.
Fast testing mode
can be enabled in
Test speed setup
function
in
Setup menu
. Refer to chapter
4.8.4 Test speed setup
for more information.
Select Simple test function in Main menu.
Figure 6.23: Simple test menu
Keys:
/
Selects the test sequence from the list
START
Starts the selected test. See chapter
6.5 Carrying out autotest
sequences (Code, Simple and Custom)
.
ESC
Returns to Main menu.
Note:
Test functions and limits of Simple tests are listed in
Appendix C
