Metos 4241001, Operating Instructions Manual, Page: 42 / 90

42
“TIMER”: the display shows the time passed
since the start of cooking for a few seconds,
which is a useful function when cooking “new
food” in manual mode for which we need to
note down the total cooking time to define a
program in the future.
“ C Y C L E S T O P ” : t h e d i s p l a y s h o w s S T O P
CYCLE ON, press key 19 to activate the
f u n c t i o n : a t t h e e n d o f e a c h c y c l e t h e
appliance stops and a cyclic beep signals
the stop. The operator can therefore alter
the program with cycles in sequence to add
seasoning, remove a dish in the event of
differentiated cooking, check the state of
progress of cooking, and on closing the door
the program will automatically activate the
following cycle.
If you want to turn off the function, when
STOP CYCLE OFF appears press key 19,
the function will be turned off.
When setting, to exit programming press key
14, you exit without activating the function.
T h e “ S T O P C Y C L E ” f u n c t i o n s h o u l d b e
activated whenever starting cooking, it
cannot be saved.
P L U S : u s e f u l a d d i t i o n a l f u n c t i o n s w i t h
the oven off.
The PLUS 16 key pressed with the oven
OFF and light of key 1 (ON/OFF) off permits
displaying the following functions some of
which are useful for the operator and others
for the authorized installer.
With the appliance OFF, press key 16, scroll
to locate the relevant function, press key 19
to activate the function, key 14 or wait for
TIME OUT to exit without saving the data,
key 19 to save any settings/changes.
“ M A N UA L C L E A N ” : m a n u a l o v e n w a s h
cycle (see chapter 20).
“SOFT CLEAN”: “soft” automatic oven wash
cycle (see chapter 20).
“ H A R D C L E A N ” : “ h a r d ” a u t o m a t i c o v e n
wash cycle (see chapter 20).
“LANGUAGE”: press key 19 to display the
available languages with the SCROLLER:
Italian, English, German, French, Spanish,
Holandaise, Hungarian, Norwegian, Czech,
Croatian, Russian; after selecting the new
language press key 19, all the messages/
signals will automatically be updated in the
new language.
“ D A T E ” : u s e d t o d i s p l a y o r e d i t t h e
date, changes are made by turning the
SCROLLER, the blinking cursor will move
automatically from the day to the month,
etc., press key 19 to save the new data.
“TIME”: press key 19 to display or edit the
actual time, changes are made by turning the
SCROLLER, the blinking cursor will move
automatically from the hours to the minutes,
etc., press key 19 to save the new data.
25 • PLUS: USEFUL ADDITIONAL FUNCTIONS WITH THE OVEN OFF
900-----rev00