Metos 4241001, Operating Instructions Manual, Page: 41 / 90

41
The key 16 pressed in succession with other
keys provides access to further important
functions:
“DELAYED STARTING”:
W o r k i n g c o n d i t i o n : P E R M A N E N T S T O P
(light of key 15 off) of any one program
(MANUAL or PROGRAM WITH NAME). This
function permits starting a cooking program
with a time lag, or preheating the oven with
no load, so as to organize the work better
during idle periods.
With the oven on, select the desired cooking
program or set a manual program, press
k e y 1 9 s o t h a t t h e d i s p l a y s h o w s t h e
program name, press key 16, the display
will show “DELAY START”, press key 19,
the display will blink dd.mm.yy (day, month,
year) with the SCROLLER set the required
date for postponed starting, the blinking
cursor will automatically move from the day
to the month and then the year, press key
19 to confirm the setting, the display will
show the hours and minutes when you want
automatic starting, set with the SCROLLER,
press key 19 to confirm, the display will
show “START”, press key 19, the display
signals alternating “WAIT” “START hh.mm”
where hh.mm is the time for automatic
program starting.
At the set date and time the appliance
will automatically switch on and run the
preselected program, it is not possible to use
the oven at the same time.
If you want to cancel the delayed starting
function previously activated, switch off and
back on again with key 1, the appliance goes
into the standard setting, or press key 15 to
start the program immediately.
If you want to change the delayed starting
t i m e w h e n t h e “ W A I T ” “ S T A R T h h . m m ”
message appears, just press key 20 and
change the setting with the SCROLLER,
confirm with key 19, start with key 19.
When setting, to exit programming, press
key 15, and you exit without saving the
setting.
Warning: deferred cooking is permitted
solely for foods with no risk of bacterial
proliferation; do not exceed the maximum
food wait time before starting cooking,
s c r u p u l o u s l y f o l l o w c u r r e n t h e a l t h a n d
hygiene requirements.
“END TIME”, “TIMER”, “STOP CYCLE ”:
Working condition: START of the cooking
program, light of key 15 on steady.
On pressing the key 16 during cooking,
the display shows the different functions in
sequence on turning the SCROLLER.
Press key 19 to activate the desired function:
“END TIME”: For a few seconds the display
shows the exact time at which the cooking
program ends, for example 16.57; if the
program includes an end cycle with infinite
time or subsequent cycles controlled by the
core probe, the infinite or core probe cycle
start time will be shown. The function permits
programming preparation for subsequent
serving to the minute.
25 • PLUS: USEFUL ADDITIONAL FUNCTIONS
900-----rev00