Metos 4241001, Operating Instructions Manual, Page: 39 / 90

C O R E P R O B E E R R O R - C o r e p r o b e f a u l t y .
Should the message appear, it is necessary to
check the connector is plugged into the socket
(27) properly. The oven can continue to be used
until the arrival of a service technician, but without
this accessory.
NO GAS - Check that the shutoff valve is open
and that there is gas coming from the main. If
there is no supply from the main, inform the gas
company or agency. If there is no problem with the
main, contact a technician or authorized service
agent.
Gas appliances are fitted with ignition devices
incorporating an automatic reset function. If
operation is not restored automatically after several
attempts, display 9 will show the error code “GAS
SHUTDOWN” illustrated alongside. A beep warns
the operator.
Press the key 15 to reset ignition.
I f t h e f a u l t p e r s i s t s , c o n t a c t a t e c h n i c i a n o r
authorized service agent.
Note: Burner shutdown is a safety condition.
Therefore, this situation is not a sign of the
appliance malfunctioning..
If, after carefully carrying out these checks, the
appliance still does not function properly, call a
technician or authorized service agent.
Note: When contacting service technicians, try
to explain the fault in as much detail as possible,
referring all the information indicated on the
identification data plate (see page 3).
BOILER ERROR - Boiler pre-heating probe fault;
oven can only be operated in convection mode;
steam and combined modes are disabled. Call
in the technical assistance service.
39
MESSAGES
24 • SELF-DIAGNOSIS AND FAULT IDENTIFICATION
The main fault warning messages are:
900-----rev00
WARNING FOR GAS MODELS
CLIMA
2 5 2 5 0 2 ,3 4
M A N U A L
CO R E P R O B E E R R
CLIMA
2 5 2 5 0 2 ,3 4
M A N U A L
N O G A S
CLIMA
2 5 2 5 0 2 ,3 4
M A N U A L
G A S S H U T D O W N
CLIMA
2 5 2 5 0 2 ,3 4
M A N U A L
B O I L E R E R R O R