Metos 4241001, Operating Instructions Manual, Page: 12 / 90

12
OPERATIONS
Manual cooking with a number of cycles in
sequence permits including preheating the
oven with no load, thus becoming the first
cooking cycle; let’s see an example:
7.1 • SWITCH ON
Press key 1. Any faults are signalled after
“self-diagnosis” on display 9. See “Self-
diagnosis and fault identification”.
SELECT CYCLE 1
Press key 18.
SELECT
The backlit keys of the cooking modes all
b l i n k : p r e s s C O N V E C T I O N , S T E A M o r
COMBINATION. The light comes on steady to
confirm the selection.
SET THE TEMPERATURE
The temperature display blinks with a preset
value of 130°C. Set the required cooking
temperature with the knob (to the right
increases, to the left decreases) and confirm
by pressing the knob or key 19.
Note: Approximately 10 sec. (TIME OUT*)
after releasing the SCROLLER, the display will
revert to the actual oven temperature.
SET THE TIME
The time display 7 shows [ inf ] infinite, press key
11 to set a cooking time. In our example we want
to leave the COOKING TIME on [ inf ] to be able to
use cycle 1 as oven preheating. On reaching the
set temperature, an intermittent beep will signal
that oven preheating is over and “LOAD” will be
shown on display 9.
7.2 • SELECT CYCLE 2
P r e s s k e y 1 8 , d i s p l a y 9 w i l l s h o w
”CYCLE 1” blinking, turn the SCROLLER
to the right, it will show “CYCLE 2”.
The backlit keys of the cooking modes all
b l i n k : p r e s s C O N V E C T I O N , S T E A M o r
COMBINATION. The light comes on steady to
confirm the selection.
Note: The data are saved automatically
10 seconds after the last setting, press key 18,
display 9 will show “CYCLE 1” blinking, turn
the SCROLLER to the right to search for the
cycle you want to view, and make any changes
as customary.
SET THE TEMPERATURE
The temperature display blinks with a preset
value of 130°C. Set the required cooking
temperature with the knob (to the right
increases to the left decreases) and confirm by
pressing the knob or key 19.
SET THE TIME
The time display 7 shows [ inf ] infinite, the
time display 7 blinks, display 9 shows “CYCLE
TIME”, within 10 seconds set the cooking time,
e.g. 45 minutes by turning the SCROLLER to
the right.
Or
SET COOKING WITH CORE PROBE
Refer to the “Setting the core probe” heading
and so on to set the required number of cycles
(9 at most).
7 • SETTING THE OVEN MANUALLY FOR MANUAL
COOKING WITH UP TO 9 CYCLES IN SEQUENCE
900-----rev00
STARTING THE COOKING PROGRAM