SECTION 4
MAINTENANCE
81
Avoid Starwheels
Wipe
Printhead
in this
direction.
Cleaning the Printhead
The Printhead is cleaned automatically during shut-down, power-up, Mid Job Servicing and other circumstances.
If necessary you can also force a printhead cleaning using the Quick/Normal/Full “
Clean Printhead
” features.
These features can be accessed from the
Toolbox,
under the
“Service” Tab,
or from the
Touchscreen
, under the
“
Maintenance”
Menu drop-down.
If running these Cleaning Levels doesn’t help improve image quality, the Printhead surface can be cleaned
manually; as described below.
Tip:
Before you begin this process you may want to set the Media Thickness to 10 mm. This will give you more
room to get your hand under the Printhead. Be sure to make a note of your current setting, so you can reset this value
after you have completed the cleaning process.
1.
From the
Touchscreen
, tap “
Menu
”, then tap
“Maintenance”
from the drop-down list.
Tap
“Inspect Sled”
and then Yes.
The Service Station Sled moves out from under the printhead and the Printhead lowers to the print position.
2.
Open the
Printhead Door
.
This will stop the “Inspect Timeout” countdown timer
.
NOTE
: If you don’t open the Printhead Door within 30 seconds, to stop the countdown timer, the Printhead
will automatically raise and the Service Station Sled will return to the cap position when the “Inspect
Timeout” value reaches zero.
3.
Open the
Ink Tank Door
.
4.
Release the
Clamshell Latch
to open the
Clamshell.
5.
Using a lint free cloth, dampened with distilled
water, carefully reach in towards the back of the
Printhead surface and wipe the Printhead
surface in the direction shown (red arrow).
Repeat as needed to remove ink/debris.
6.
Carefully
Close the Clamshell,
while supporting the open
Printhead Door,
to be sure the Printhead Door
doesn’t slam closed.
7.
Close the
Ink Tank Door
.
8.
Close the
Printhead Door
. The Printhead will raise and Service Station Sled will return to the cap position.
Tip
: If you find that you need to clean the printhead surface frequently (more than a few times a day), to fix
color-mixing or nozzle firing issues; this may be an indication that there is a problem with automatic printhead
maintenance or capping. Please contact your service representative to have them inspect the printer.
In General, if the image quality remains poor (fuzzy/missing print, in same location), even after verifying that
all ink lines are filled with ink, running “
Full Clean Printhead
” and manually cleaning Printhead; this is an
indication that the Printhead may need to be replaced. It is recommended to replace the Wiper Roller when
replacing the Printhead.
CAUTION
Avoid contact with the Starwheels,
shown circled in red. If they get bent
this will cause feeding issues.
Avoid contact with the Print Platen
(silver metal grate), to avoid scraping
(injuring) the back of your hand.
Summary of Contents for Quadient Rena MACH 6
Page 1: ...Digital Color Inkjet Printer MACH 6 User Guide...
Page 131: ......
Page 132: ...2 1 2020 Quadient April 9 2020...