Memjet Quadient Rena MACH 6 User Manual Download Page 25

Page: 25 / 132

SECTION 2

INSTALLING PRINTER

Fully open the released

Printhead Latch [1].

This will fully retract the Ink Revolver Couplings.

Ink Revolver Couplings are shown with Fluidic Cap Protectors

[2]

installed, in images below.

Remove Fluidic Cap Protectors [2]

, if present, on

Ink Revolver

Couplings.

Save these items. They should be used to seal and

protect the open ink system whenever a Printhead Cartridge is not
installed.

WARNING

If the Printhead Latch

failed to release, don’t

force the latch open.

Severe damage will

result.

Release the Latch

using the

“Release Printhead”

or “System Deprime”

buttons on the

Touchscreen or

Toolbox.

Summary of Contents for Quadient Rena MACH 6





































































































































Search results

Summary of Contents for Quadient Rena MACH 6

Reviews:

Related manuals for Quadient Rena MACH 6

Brands by name

Popular brands

Memjet Quadient Rena MACH 6, User Manual

Search results

Summary of Contents for Quadient Rena MACH 6

Reviews:

Related manuals for Quadient Rena MACH 6

Brands by name

Popular brands