APPENDIX
119
B
A
12.
Reconnect the Wiper Motor’s electrical connection
[D]
and make sure the connector and wiring are
positioned inside the Sled and as low as possible.
WARNING:
If connector or wiring is not positioned properly it may contact the Printhead Carriage which
may damage the Printhead or cause “Maintenance Jam” (Sled Error) conditions.
13.
Close the Printhead Door.
14.
Turn ON the Main Power Switch.
15.
Press the Soft Power button to power-up the printer.
16.
If a new Wiper Roller was installed during this process; please proceed to the section titled “Condition New
Wiper Roller”.
Cleaning Service Station Tray and Siphon Hose:
1.
Using the
Touchscreen
, select
“Menu,”
and tap
“Maintenance”
from the drop-down menu. Tap
“Inspect
Sled”
. The Service Station Sled moves out from under the Printhead Carriage.
2.
Open the Printhead Door.
3.
Press the Soft Power button to power-down the printer. Then turn OFF the Main Power Switch.
4.
Remove Wiper Motor Assembly
and Capping Station as
described in previous sections.
5.
Remove the Non-Operator Side
Bracket
[B]
(secured using two
Philips head screws). Clean the
opening of the Siphon Hose
using a clean, damp, lint-free
cloth or foam-tipped swab.
6.
Wipe Tray
[A]
with a clean, damp, lint-free cloth.
CAUTION:
Be careful not to get any nearby electrical connections or PC Boards wet
.
7.
Install and secure the Non-Operator Side Bracket
[B]
.
8.
If you plan to clean additional service Station Components continue to next item/section.
If not, reinstall the Capping Station into the Service Station Tray, making sure that the two inserts are
present and that the Capping Station locks fully into position. Reinstall the Wiper Motor Assembly into the
Service Station Tray; making sure that the four springs are present and that the Wiper Motor Assembly
locks fully into position.
9.
Close the Printhead Door.
10.
Turn ON the Main Power Switch.
11.
Press the Soft Power button to power-up the printer.
12.
If a new Wiper Roller was installed during this process; please proceed to the section titled “Condition New
Wiper Roller”.
Summary of Contents for Quadient Rena MACH 6
Page 1: ...Digital Color Inkjet Printer MACH 6 User Guide...
Page 131: ......
Page 132: ...2 1 2020 Quadient April 9 2020...