SECTION 2
INSTALLING PRINTER
18
Install Printhead Cartridge
Use this procedure to install the Printhead into a printer that doesn’t currently have a Printhead installed. If you are
removing and or replacing a Printhead Cartridge; please refer to the section titled “Remove/Replace Printhead
Cartridge”
Protective Packaging
1 & 10
Handles
5
Foil vacuum bag
2
Protective strip for nozzles
6
Cardboard packing box
3 & 8
Protective cover flaps
7
Cover retaining clip
4
Protective cover
9
Protective strip for electrical contacts
NOTE:
Discard protective tape once it is removed. Do NOT reuse protective tape.
Keep all other packaging to store/dispose of old Printhead Cartridge.
ATTENTION
If you experienced fuzzy print quality or an abrupt failure in a particular area of nozzles on the previous
Printhead, we recommend that you have the service station inspected/cleaned and the wiper roller
replaced before installing a new Printhead Cartridge.
Failure to do so will increase the chance of damage to the new Printhead Cartridge.
Service station maintenance and wiper roller replacement should only be performed by a
qualified/trained person. Please contact your service representative to obtain training or to have them
perform this process for you.
WARNING!
Ink in Printhead Cartridge
may be harmful if swallowed. Keep Printhead Cartridge
out of reach of children. Discard empty Printhead Cartridge
immediately.
Summary of Contents for Quadient Rena MACH 6
Page 1: ...Digital Color Inkjet Printer MACH 6 User Guide...
Page 131: ......
Page 132: ...2 1 2020 Quadient April 9 2020...