SECTION 3
OPERATING PRINTER
74
Using Layout Tab Printing Adjustments
Top Adjustment
moves image vertically (-
4.98mm up to +200.02mm down
) from top (leading edge)
of media. (
0.1mm increments
)
Left Adjustment
moves image horizontally (
+200.02mm
right
).
Purge Bar Position*
– In operation, Printhead spits a small amount of ink into gap between pieces to
keep nozzles refreshed (hydrated). For irregular-shaped pieces (
like the open envelope flap, shown
above
) sensor may “read” bottom of form early; causing purge bar to be sprayed (printed) onto flap.
This feature allows you to adjust the purge bar position (
in 0.1mm increments
) to account for extra
distance needed to reach actual gap between pieces.
Tip
: To determine Purge Bar Position value; measure the distance from the purge bar (
black line
printed on flap
) to the trailing edge of the media (
end of flap
) and add 3mm.
* See also
“Purge Bar Position”
in
Printer Toolbox
section.
Max Page Width
– Sets width of actual print area. (+0.50mm to 222.75mm in
0.1mm increments
).
Can be used to cut-off unwanted data or data that may be printed off right side of media.
NOTE
: Setting a value lower than 222.75mm reduces the maximum print width of the printhead.
Summary of Contents for Quadient Rena MACH 6
Page 1: ...Digital Color Inkjet Printer MACH 6 User Guide...
Page 131: ......
Page 132: ...2 1 2020 Quadient April 9 2020...