Megger BITE 2 Instruction Manual Download Page 69

Page: 69 / 135

AVTM246004 BITE 2/2P Rev 4 July 2011

SETTING OPTIONS

Overview

You can change
these default
options to optimize
the BITE 2 and BITE
2P functions for your
use.

This chapter explains how to set options that control the operation of
the BITE2/2P

receiver

The BITE 2/2P

receiver

is shipped with certain options set, including:

•

Turning the backlight on and off so that the

receiver

screen

does or does not light up when the instrument is powered on

•

Adjusting the screen contrast

•

Selecting the language in which the

receiver

displays

information (English, Français, Deutsch, Español, Português)

•

Setting the date and time

•

Setting the line frequency to 50 or 60Hz

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for BITE 2








































































































































Search results

Summary of Contents for BITE 2

Reviews:

Related manuals for BITE 2

Brands by name

Popular brands

Megger BITE 2, Instruction Manual

Search results

Summary of Contents for BITE 2

Reviews:

Related manuals for BITE 2

Brands by name

Popular brands