STANDARD TEST PROCEDURE
AVTM246004 BITE 2/2P Rev 4 July 2011
45
(EXPORT DATA)
Y TRANSMIT DATA
N (Y/N?) MENU
1.
Press
for TRANSMIT. The screen will display the
following screen.
EBITE/PC
PRINTER MENU
2.
Press
for PRINTER then SELECT. You will be
prompted to enter the test number. During printing the
following screen will appear:
ALLTESTS
SELECT
3.
Press
until the active test number is displayed. In this
example, six is the active test.
TEST 001 OF 006
O = CANCEL ACCEPT
4.
Reconnect the
potential probe
to resume testing. The
measurement screen is displayed again.
Powering Down and Disconnecting the BITE 2/2P
Before you power down and disconnect the
BITE 2/2P
transmitter
, first power down and disconnect the
receiver
.
Then power down and disconnect the
transmitter
. Carefully
follow these steps:
1.
To power down the
receiver
, press the
key on the
receiver
until the LCD displays the following:
POWER DOWN
EXPORT DATA MENU
www.
GlobalTestSupply
.com
Find Quality Products Online at:
