CONTROLS, CONNECTORS, INDICATORS AND MENUS
AVTM246004 BITE 2/2P Rev 4 July 2011
19
7-pin connector
—The 7-pin connector is used to insert one
of the following: RS-232 communication cable, bar-code wand
(optional), potential probe or printer.
4-pin connector
—The 4-pin connector is used to connect the
current sensor (
CT
).
3-pin connector
—The 3-pin connector is used to connect the
battery charger.
Buzzer
—The buzzer prompts the user to input data. It also
sounds under certain error conditions.
Receiver Keys
There are three keys located on the
receiver
that are used to
operate the
receiver
and to navigate through the menus and
displays on the LCD screen:
The UP ARROW and DOWN ARROW keys are
used to select information displayed next to
these keys on the screen. These keys are also
used to scroll up and down through
receiver
screens.
The ENTER key is used to access
receiver
menus, which are shown in Figure 3-6
through Figure 3-7.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
