M
AVTM246004 BITE 2/2P Rev 4 July 2011
109
INTRODUCTION
About AVOLINK…
AVOLINK is Megger's software program for use with:
•
BITE 2, EBITE and MBITE (battery impedance testers)
•
Three-Phase TTR (transformer turn ratio test set)
•
DART Cable Fault Analysis System
NOTE:
This manual refers to any one of the above as a remote
device and refers to the three battery impedance testers as the
BITE.
AVOLINK allows you to transfer test data from the remote
device to a personal computer (PC). You can save test data
from the remote device and view it on the PC in a viewing
format appropriate for the data. With AVOLINK, you can
transfer DART wave forms to a PC and save them for future
use.
AVOLINK software consists of two programs—AVOLINK, which
provides the interface to the remote device, and AVOCOM32,
which provides the communication to the remote device.
AVOLINK takes care of starting and terminating AVOCOM32.
Your AVOLINK installation diskettes or CD will install both
AVOLINK and AVOCOM32. For additional information, see
"AVOCOM 32" on page 136.
A null-modem serial cable connects the remote device to the
PC. The remote device and the PC must operate with the same
communication parameters.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
