manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Before You Drive

Lighting

1.63

NOTE: If the hazard warning lamps 
have been switched on automatically, 
press the hazard warning lamps 
button once to switch them off.

Panic alarm

The panic alarm function is designed to 
attract attention by sounding the horn and 
flashing the turn signal lamps repeatedly.

The panic alarm can be switched on by 
pressing the hazard warning lamps button 
for a period of 3 seconds or more.

The horn will cease after the panic alarm has 
been active for a long period of time, but the 
turn signal lamps will continue to flash. The 
horn can be re-initiated by pressing the 
hazard warning lamps button for a period of 
3 seconds or more.

To switch the panic alarm off, press the 
hazard warning lamps button briefly.

Parking lights

NOTE: The parking lights can only be 
activated when the ignition is 
switched off.

1. To activate the parking lights, press the 

turn signal/hi beam stalk down for the 
left-hand side or push up for the right-
hand side until resistance is felt. The 
selected parking lights will illuminate 
once the vehicle has been locked.

2. To deactivate the parking lights, press 

the turn signal/hi beam stalk down for 
the left-hand side or push up for the 

right-hand side until resistance is felt. 
The selected parking lights will then be 
deactivated.

NOTE: This will allow parking lights on 
both sides to be active at same time, 
and also allows one side to be 
deactivated, whilst keeping the 
opposite side activated.

p13.book  Page 63  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

Baja Designs S8 Instructions Manual preview
S8
Brand: Baja Designs Pages: 6
Yakima K800 Instructions Manual preview
K800
Brand: Yakima Pages: 8
BMW 01 29 9 416 497 Installation Instructions preview
01 29 9 416 497
Brand: BMW Pages: 5
Gatorback Mudflaps GCR53F Mounting Diagram & Instructions preview
GCR53F
Brand: Gatorback Mudflaps Pages: 4
Safe Fleet PRIME DESIGN VRR-E-PM21 Assembly Instructions Manual preview
PRIME DESIGN VRR-E-PM21
Brand: Safe Fleet Pages: 12
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
Guidosimplex 907P User Manual preview
907P
Brand: Guidosimplex Pages: 8
SNIPER V2 Inox Owner'S Manual preview
V2 Inox
Brand: SNIPER Pages: 2
Ford FUSION 2014 Owner'S Manual preview
FUSION 2014
Brand: Ford Pages: 458
Gator GT700SD User Manual preview
GT700SD
Brand: Gator Pages: 6
F.lli Menabo CROSS 2 Assembly Instructions Manual preview
CROSS 2
Brand: F.lli Menabo Pages: 16
Lexus LS 460 2011 Owner'S Manual preview
LS 460 2011
Brand: Lexus Pages: 830
Mopar 82214480 Manual preview
82214480
Brand: Mopar Pages: 17
Menabo KIT+1 MERAK Fitting Instructions Manual preview
KIT+1 MERAK
Brand: Menabo Pages: 8
AllTrade Powerbuilt 648601 Operating Instructions preview
Powerbuilt 648601
Brand: AllTrade Pages: 3
Perrycraft SportQuest Series Installation preview
SportQuest Series
Brand: Perrycraft Pages: 2
Nugent Tipper Remote Kit User Manual preview
Tipper Remote Kit
Brand: Nugent Pages: 21
Ecco Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600 Manual preview
Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600
Brand: Ecco Pages: 2

Brands by name

Popular brands

Load more brands