manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Comfort and Convenience

Climate Control

4.5

Climate Controls

1. MONO button

2. Heated mirror button
3. AUTO/AUTO LO button

4. Air conditioning (A/C) button

5. Demist button

6. Air recirculation button

7. Temperature control - Right-hand side

8. Heated seat button - Right-hand side
9. Blower speed control

10. Heated seat button - Left-hand side

11. Air distribution buttons

12. Temperature control - Left-hand side

Modes of Operation

Automatic Mode

In automatic mode, the climate control 
system maintains the set interior 
temperature using a combination of 
differing blower speeds, air recirculation and 
air distribution.

The control panel uses different colors to 
indicate operational states:

•

Orange indicates ON.

•

White indicates OFF but available for 
use.

•

Grey indicates not available for use.

To switch on automatic mode, touch the 
AUTO button.

The light on the button illuminates and the 
air distribution, temperature and blower 
speed are adjusted automatically on both 
sides of the vehicle.

In AUTO mode, there is no need to adjust the 
blower speed or air distribution, the system 
will operate whichever controls it needs to 
maintain the set temperature.

If you do wish to change the air distribution 
of the climate control system, touch the 
preferred button. This will then put the 
system into AUTO fan mode.

This is denoted by the color of the blower 
speed slider. The bar is grey and the slider 
moves by itself when the blower is under 
automatic control. Here, the system is 
continuing to control the blower speed to 
maintain the set temperature. There is an 
additional mode known as AUTO LO. The 
AUTO LO function operates the fan at lower 
speeds to achieve and maintain the desired 
cabin temperature. This reduces the level of 
sound emitted from the climate control 
system whilst retaining auto functionality.

To switch on AUTO LO, press the AUTO 
button once when in AUTO mode. The AUTO 
LO symbol will change from white to orange.

To return to AUTO, press the AUTO button a 
single time.

If the blower speed is adjusted while AUTO 
LO is active the manual mode will be 
selected by default. If the AUTO button is 
then pressed the AUTO LO mode will be 
activated again. Pressing the AUTO button a 
second time will select the AUTO mode.

p13.book  Page 5  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

Toyota 2012 Rav4 Owner'S Manual preview
2012 Rav4
Brand: Toyota Pages: 529
Kathrein DDA Series User Manual preview
DDA Series
Brand: Kathrein Pages: 7
UMBRA RIMORCHI 39030 Installation Instructions Manual preview
39030
Brand: UMBRA RIMORCHI Pages: 18
Fabbri BICI OK 2 Quick Start Manual preview
BICI OK 2
Brand: Fabbri Pages: 4
Dakota Digital Retrotech RTX-68D-CHG Quick Start Manual preview
Retrotech RTX-68D-CHG
Brand: Dakota Digital Pages: 4
BESAFE iZi Flex Manual preview
iZi Flex
Brand: BESAFE Pages: 4
Phonocar VM338 Mounting Instructions preview
VM338
Brand: Phonocar Pages: 6
Chevrolet 2013 Spark Specifications preview
2013 Spark
Brand: Chevrolet Pages: 2
Pontiac 2004 Vibe Navigation System Owner'S Manual preview
2004 Vibe Navigation System
Brand: Pontiac Pages: 44
Opel 2011 Insignia Owner'S Manual preview
2011 Insignia
Brand: Opel Pages: 254
Cadillac 1993 Seville Owners Literature preview
1993 Seville
Brand: Cadillac Pages: 407
Park-Daddy PD50AA Installation Manual preview
PD50AA
Brand: Park-Daddy Pages: 22
Cadillac 2004 ESCALADE Customer Convenience/Personalization Manual preview
2004 ESCALADE
Brand: Cadillac Pages: 20
VDO RUDDER ANGLE INDICATOR Installation Instructions Manual preview
RUDDER ANGLE INDICATOR
Brand: VDO Pages: 8
Chevrolet 1996 Cavalier Owner'S Manual preview
1996 Cavalier
Brand: Chevrolet Pages: 372
Scion 2012 iQ Quick Reference Manual preview
2012 iQ
Brand: Scion Pages: 24
RAM Truck 2014 Owner'S Manual preview
Truck 2014
Brand: RAM Pages: 330
Scania Interlock 700 Series Instructions For Use Manual preview
Interlock 700 Series
Brand: Scania Pages: 82

Brands by name

Popular brands

Load more brands