manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Comfort and Convenience

Climate Control

4.11

Heated mirror

WARNING: Remove any accumulated 
ice or snow from the mirrors and 
windows before setting off. 
Impaired visibility could endanger 
yourself and others.

Touch the button to heat the exterior 
mirrors. The icon on the button will 
illuminate. To switch off, touch the button 
again and the icon on the button will be 
extinguished.

The heated mirrors switch off automatically 
after a set time, depending on the outside 
air temperature.

System Calibration

The climate control system may periodically 
re-calibrate itself to ensure optimum system 
performance is maintained. During this cycle, 
the ‘CALIBRATING’ message is shown on the 
display and system operation is inhibited.

Calibration should take no more than a 
minute and when complete the 
‘CALIBRATING’ message will disappear from 
the display.

If the ‘CALIBRATING’ message does not 
disappear, contact your McLaren retailer.

p13.book  Page 11  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

RAM Commercial PROMASTER 2020 Quick Reference Manual preview
PROMASTER 2020
Brand: RAM Commercial Pages: 12
Wallbox Commander 2 Installation And User Manual preview
Commander 2
Brand: Wallbox Pages: 7
K&M 8494 Installation Manual preview
8494
Brand: K&M Pages: 3
B-Speech Pago INBTHF020 User Manual preview
Pago INBTHF020
Brand: B-Speech Pages: 24
Lexus LX 470 Owner'S Manual preview
LX 470
Brand: Lexus Pages: 369
Mountain Top Sports Bar Installation Manual preview
Sports Bar
Brand: Mountain Top Pages: 12
KRAFTWERK Automotive 31006 Instructions preview
Automotive 31006
Brand: KRAFTWERK Pages: 2
Meta System 900000358 Installation Technical Sheet preview
900000358
Brand: Meta System Pages: 22
Quadratec 16053.5300 Installation Manual preview
16053.5300
Brand: Quadratec Pages: 6
Cadillac 2003 Seville Owner'S Manual preview
2003 Seville
Brand: Cadillac Pages: 402
Cobra BAK R294 Manual preview
BAK R294
Brand: Cobra Pages: 2
KEKO K162 Installation Instructions Manual preview
K162
Brand: KEKO Pages: 13
Road Armor Stealth 4191F Series Install Instructions preview
Stealth 4191F Series
Brand: Road Armor Pages: 5
Mercedes-Benz 2007 SLR Mclaren Operator'S Manual preview
2007 SLR Mclaren
Brand: Mercedes-Benz Pages: 425
Reliant Rebel 700 1967 Workshop Manual preview
Rebel 700 1967
Brand: Reliant Pages: 116
Acura 2003 3.2 TL Owner'S Manual preview
2003 3.2 TL
Brand: Acura Pages: 347
Waeco MAGIC WATCH MWE-850-4XXL Installation And Operating Manual preview
MAGIC WATCH MWE-850-4XXL
Brand: Waeco Pages: 228
Brodit Heavy Duty ProClip Installation Instructions preview
Heavy Duty ProClip
Brand: Brodit Pages: 2

Brands by name

Popular brands

Load more brands