manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Before You Drive

Occupant Safety

1.46

Seat belt warning light

The seat belt warning light in the 
instrument cluster and a warning tone 

reminds vehicle occupants to fasten their 
seat belts. The seat belt warning light 
extinguishes and the warning tone ceases 
when the driver and passenger have 
fastened their seat belt.

Supplementary Restraint System

Air bag system

Your McLaren is equipped with the following 
air bags:

•

driver’s front air bag in the steering 
wheel

•

passenger’s front air bag in the 
dashboard

•

driver’s and passenger’s knee air bags

•

side head air bags in the doors

WARNING: Take note of all warning 
labels attached to the sun visors.

WARNING: Air bags are not a 
substitute for correctly worn seat 
belts, they enhance the level of 
occupant protection offered by seat 
belts.

WARNING: Correct operation of the 
air bags can only occur if the 
steering wheel, the passenger’s air 
bag cover, the knee air bag cover 
and the door trim are not covered.

WARNING: To reduce the risk of 
injuries in the event of an accident, 
observe the following points:

p13.book  Page 46  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

B-Speech B-Speech Prim Manual preview
B-Speech Prim
Brand: B-Speech Pages: 18
VEAP SHIELD UNITED FT Series Mounting Instruction preview
FT Series
Brand: VEAP SHIELD UNITED Pages: 3
Oldsmobile 2004 Alero Owner'S Manual preview
2004 Alero
Brand: Oldsmobile Pages: 360
Code 3 21 COVERT Series Installation And Operation Instructions Manual preview
21 COVERT Series
Brand: Code 3 Pages: 16
Quadratec Brute Strength 12057.0271 Installation Manual preview
Brute Strength 12057.0271
Brand: Quadratec Pages: 6
Thule 1306 RAPID SYSTEM Fitting Instructions Manual preview
1306 RAPID SYSTEM
Brand: Thule Pages: 8
travall TDG-1301 Fitting Instruction preview
TDG-1301
Brand: travall Pages: 2
Gacell 13553 User Manual preview
13553
Brand: Gacell Pages: 12
Gator GHWCUSB2 User Manual preview
GHWCUSB2
Brand: Gator Pages: 8
benbat BM721 Instructions For Use Manual preview
BM721
Brand: benbat Pages: 14
SPL FE Z33 Installation Instructions preview
FE Z33
Brand: SPL Pages: 5
Havis-Shields 1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P Datasheet preview
1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P
Brand: Havis-Shields Pages: 1
TAUBENREUTHER 16-5911 Manual preview
16-5911
Brand: TAUBENREUTHER Pages: 18
Metra Electronics 99-5026 Installation Instructions Manual preview
99-5026
Brand: Metra Electronics Pages: 20
Mazda 3 Facelift 2006 Training Manual preview
3 Facelift 2006
Brand: Mazda Pages: 94
Saab 2006 9-5 Owner'S Manual preview
2006 9-5
Brand: Saab Pages: 288
Ranger design 1525-NSX Quick Start Manual preview
1525-NSX
Brand: Ranger design Pages: 22
ideus vv900 User Manual preview
vv900
Brand: ideus Pages: 116

Brands by name

Popular brands

Load more brands