manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Driving Controls

Driving Safety Systems

2.30

Hill hold control

If the brake pedal is applied to hold the 
vehicle on a hill, this function will continue to 
apply the brakes for 2 seconds after the 
pedal is released to assist a smooth start.

Brake-steer

Brake steer offers the benefits of a torque 
vectoring differential, but is integrated into 
the braking system reducing weight and 
providing excellent speed of response.

Torque vectoring gives the differential the 
ability to change the amount of power that 
is sent to each of the rear wheels to provide 
optimum stability and traction.

If the system detects that the vehicle is 
starting to understeer through a corner, the 
inside rear brake is gently applied. This helps 
to increase the yaw rate of the vehicle, 
making the vehicle feel more resistant to 
understeer. The lateral ‘g’ force is also 
increased giving better handling 
characteristics.

If the driver uses too much throttle exiting a 
corner, the inside rear wheel increases 
speed, which without brake steer could 
cause the vehicle to become unstable. In this 
situation, brake steer will again gently apply 
the brake on the inside rear wheel, thereby 
restoring traction and stability.

Electronic brake pre-fill

If the accelerator pedal is suddenly released, 
the electronic brake pre-fill function 
immediately brings the brake pads into 
contact with the discs, ensuring rapid 
braking.

p13.book  Page 30  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

LaserTrack Flare Installation Manual preview
Flare
Brand: LaserTrack Pages: 12
AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
Eaton Green Motion DC 22 Training preview
Green Motion DC 22
Brand: Eaton Pages: 65
GReddy Intercooler Kit Type 31 Installation Manual preview
Intercooler Kit Type 31
Brand: GReddy Pages: 9
P-Invent Troller User Manual preview
Troller
Brand: P-Invent Pages: 4
U.S. General 96524 Set Up And Operating Instructions Manual preview
96524
Brand: U.S. General Pages: 8
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
Yutrax TX107 Operator'S Manual preview
TX107
Brand: Yutrax Pages: 8
walser ULTIMATE SPEED 296713 Assembly And Safety Advice preview
ULTIMATE SPEED 296713
Brand: walser Pages: 10
Mercedes-Benz 2009 E-Class Manual preview
2009 E-Class
Brand: Mercedes-Benz Pages: 373
Honda 08V31-TE0-100A Installation Instructions Manual preview
08V31-TE0-100A
Brand: Honda Pages: 10
Hella 2DA 008 136-031 Mounting Instructions preview
2DA 008 136-031
Brand: Hella Pages: 2
Yakima Landing Pad 11 Manual preview
Landing Pad 11
Brand: Yakima Pages: 28
Volvo V70 2014 Quick Manual preview
V70 2014
Brand: Volvo Pages: 16
CITROEN 2 CV4 Owner'S Manual preview
2 CV4
Brand: CITROEN Pages: 86
ADAPT SOLUTIONS ASENTO EV-COLC15R Installation Manual preview
ASENTO EV-COLC15R
Brand: ADAPT SOLUTIONS Pages: 22
Federal Signal Corporation Cuda TriOptic 351014F Series Instruction Sheet preview
Cuda TriOptic 351014F Series
Brand: Federal Signal Corporation Pages: 4
Kia Magentis 2002 Owner'S Manual preview
Magentis 2002
Brand: Kia Pages: 216

Brands by name

Popular brands

Load more brands