manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Before You Drive

Seats

1.35

Manual seat backrest rake adjustment

WARNING: To minimize the risk of 
injury, position the backrest as close 
as possible to vertical.

NOTE: Do not recline the seat backrest 
so that it repeatedly contacts the rear 
bulkhead as this could lead to damage 
over time.

Lift the lever, move the seat backrest to the 
position required, and release the lever.

Manual seat height adjustment

Press the switch up or down until the seat 
reaches the desired height.

NOTE: Height adjustment is only 
available on the driver’s seat.

Racing seats

Seat Forward and Rearward Adjustment

NOTE: It is only possible to adjust the 
forward and rearward position of the 
seat.

To adjust the seat, lift the lever and slide the 
seat to the desired position, ensuring you 
can comfortably reach all pedals and are able 
to move them through their full travel.

WARNING: Ensure the seat is locked 
in position before driving.

p13.book  Page 35  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

JANE MICRO Quick Start Manual preview
MICRO
Brand: JANE Pages: 6
Quadratec QR3 Installation Manual preview
QR3
Brand: Quadratec Pages: 8
RAM Commercial PROMASTER 2020 Quick Reference Manual preview
PROMASTER 2020
Brand: RAM Commercial Pages: 12
Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
FormFit HD 10L07 Installation Instructions preview
HD 10L07
Brand: FormFit Pages: 2
AddSecure Asset Light Installation Manual preview
Asset Light
Brand: AddSecure Pages: 14
Flash Cover MN002 Installation Manual preview
MN002
Brand: Flash Cover Pages: 2
ideus VV950 User Manual preview
VV950
Brand: ideus Pages: 159
Whispbar K919W Fitting Instructions Manual preview
K919W
Brand: Whispbar Pages: 17
Hyundai Entourage 2008 Quick Reference Manual preview
Entourage 2008
Brand: Hyundai Pages: 11
Westin 31-0190 Installation Instructions preview
31-0190
Brand: Westin Pages: 2
Curtis 1POLXP1000RP Installation & Owner'S Manual preview
1POLXP1000RP
Brand: Curtis Pages: 6
Cadillac XLR-V Specifications preview
XLR-V
Brand: Cadillac Pages: 2
Buick Cascada 2016 Getting To Know Manual preview
Cascada 2016
Brand: Buick Pages: 20
Mopar 82214480 Manual preview
82214480
Brand: Mopar Pages: 17
Connects2 CTUPO01 Quick Start Manual preview
CTUPO01
Brand: Connects2 Pages: 8

Brands by name

Popular brands

Load more brands