manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Before You Drive

Seats

1.38

Electric seat lumbar adjustment

Press 

(1)

 to raise or 

(2)

 to lower the position 

of the lumbar support.

Press 

(3)

 to inflate or 

(4)

 to deflate the 

lumbar support.

Storing a memory position

Specific seat, exterior mirror, and steering 
wheel positions can be stored for up to two 
drivers.

NOTE: Exterior mirror and steering 
wheel positions can only be stored or 
recalled using the driver’s memory 
buttons.

NOTE: Steering wheel position can 
only be stored or recalled if electric 
steering column is fitted.

Set the seat, mirrors, and steering wheel to 
the desired positions; see Electric seats, 
page 1.36, Electric steering wheel 
adjustment, page 1.41 and Exterior mirrors, 
page 1.55.

Press and hold the memory set button 

(1)

 

and then simultaneously press one of the 
memory position buttons 

(2)

 to store the 

setting.

Recalling a memory position

WARNING: Only recall a seat, mirror, 
and steering wheel position, when 
the vehicle is stationary. You may 
not be able to observe road and 

p13.book  Page 38  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

A-Tach Mounts ST-1 Instructions preview
ST-1
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50291 Quick Start Manual preview
50291
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50206 Instructions preview
50206
Brand: A-Tach Mounts Pages: 2
Gardigo MARTEN-FREE CAR Instruction Manual preview
MARTEN-FREE CAR
Brand: Gardigo Pages: 36
Carcomm CNM-71 Quick Start Manual preview
CNM-71
Brand: Carcomm Pages: 2
Whispbar K392W Fitting Instructions For Basic Carrier preview
K392W
Brand: Whispbar Pages: 14
Renault 2016 Sandero Stepway Handbook preview
2016 Sandero Stepway
Brand: Renault Pages: 183
AC Schnitzer DKG Fitting Instructions Manual preview
DKG
Brand: AC Schnitzer Pages: 16
Ford 2004 Freestar Workshop Manual preview
2004 Freestar
Brand: Ford Pages: 8
Intec CVD500LCD Installation And Operation Manual preview
CVD500LCD
Brand: Intec Pages: 16
INDIWORK A-LINK2-NTG5 Instruction Manual preview
A-LINK2-NTG5
Brand: INDIWORK Pages: 18
Opel CORSA 2020 Infotainment Manual preview
CORSA 2020
Brand: Opel Pages: 103
Vauxhall 2013 Ampera Infotainment Manual preview
2013 Ampera
Brand: Vauxhall Pages: 95
Buick 1988 Riviera Owner'S Manual preview
1988 Riviera
Brand: Buick Pages: 161
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12
Edelbrock Performer-Plus 2172 Installation Instructions preview
Performer-Plus 2172
Brand: Edelbrock Pages: 4
Chevrolet Chevy II 1965 Owner'S Manual preview
Chevy II 1965
Brand: Chevrolet Pages: 46
Whispbar K519W Fitting Instructions Manual preview
K519W
Brand: Whispbar Pages: 15

Brands by name

Popular brands

Load more brands