McLaren coupe series Owner'S Handbook Manual Download Page 125

Page: 125 / 272

Driving Controls

Refueling

2.45

Filling with the fuel funnel

NOTE: The fuel funnel should only be
used when filling the fuel tank from
sources other than a gas station fuel
pump.

1. Switch off the engine.

2. Press the rear edge of the fuel filler

flap, the latch will release.

3. Open the flap.

NOTE: Your vehicle is not fitted with a
fuel filler cap.

4. Collect the fuel funnel from the luggage

compartment, see Fuel funnel,
page 5.13.

5. Insert the fuel funnel fully into the filler

neck.

6. Insert the nozzle into the fuel funnel

and dispense fuel. For fuel
recommendations, see Recommended
fuel, page 2.46.

7. Do not overfill.

WARNING: Take care to avoid
spillages and overfilling. Ensure any
spillages are cleaned immediately.

8. Remove the nozzle.

9. Remove the fuel funnel, clean

thoroughly and store in the luggage
compartment.

10. Close the fuel filler flap, you will hear

the latch engage.

p13.book Page 45 Wednesday, April 26, 2017 9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Search results

Summary of Contents for coupe series

Reviews:

Related manuals for coupe series

Brands by name

Popular brands

McLaren coupe series, Owner'S Handbook Manual

Search results

Summary of Contents for coupe series

Reviews:

Related manuals for coupe series

Brands by name

Popular brands