McLaren coupe series Owner'S Handbook Manual Download Page 205

Page: 205 / 272

Maintaining Your McLaren

Emergency Equipment

5.13

Towing eye

The towing eye

(4)

is located inside the first

aid kit case at the front of the luggage
compartment.

NOTE: Your McLaren is equipped with
a front towing eye mounting only. It is
not possible to tow other vehicles.

For information on installing the towing eye,
see Towing eye and mounting, page 5.44.

Fuel funnel

The fuel funnel

(5)

is located inside the first

aid kit case at the front of the luggage
compartment.

NOTE: Only use the fuel funnel when
filling the vehicle with fuel from
sources other than a fuel pump at a
gas station.

Do not use the fuel funnel when
topping up coolant, engine oil or any
other fluids in the vehicle.

Fire extinguisher

The fire extinguisher is located at the rear of
the luggage compartment.

Release the retaining strap and remove the
fire extinguisher.

To operate, follow the manufacturer’s
instructions on the side of the fire
extinguisher.

NOTE: The fire extinguisher must be
checked every 12 months or it may fail
in an emergency. Once the
extinguisher is used it will have to be
replaced.

p13.book Page 13 Wednesday, April 26, 2017 9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Search results

Summary of Contents for coupe series

Reviews:

Related manuals for coupe series

Brands by name

Popular brands

McLaren coupe series, Owner'S Handbook Manual

Search results

Summary of Contents for coupe series

Reviews:

Related manuals for coupe series

Brands by name

Popular brands