manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Before You Drive

Stowing Luggage

1.28

Stowing Luggage

Stowage Luggage - Spider models

When the roof is raised, the area underneath 
the tonneau cover can be used for storing 
small items. Your McLaren is supplied with 
two stowage bags for this purpose.

WARNING: Do not place loose items 
in the tonneau area. This could lead 
to damage to the roof system and/or 
the backlight glass.

The stowage bags can be filled while in the 
tonneau area or out of the vehicle.

NOTE: Only use the stowage bags 
provided. No other type of luggage 
bag can be used. The warning label on 
the interior of the tonneau cover 
confirms this.

NOTE: Ensure the contents do not 
exceed the recommended fill level 
identified by the red line on the rear of 
the bulkhead area. The warning label 
on the bulkhead confirms this.

NOTE: Do not overfill the stowage 
bags. The weight of each stowage bag 
and contents should not exceed 33 lbs 
(15 kg).

NOTE: Do not fill the stowage bags 
with any of the following:

•

hazardous and/or volatile compounds 
or liquids

•

heavy and/or sharp objects

•

foods and/or liquids affected by heat

•

fragile items or items which are easily 
breakable

Installing stowage bags

1. Open the tonneau cover. Tonneau 

Cover - Spider models, page 1.25

2. Remove the stowage bags from the 

mounts inside the tonneau cover.

3. Release the toggle and unroll the 

stowage bags.

4. Place the items inside the stowage 

bags and/or place the stowage bags in 
the tonneau area.

p13.book  Page 28  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

Camcar 2155 Fitting Instructions preview
2155
Brand: Camcar Pages: 2
Davis Instruments 8127 Installation Instructions Manual preview
8127
Brand: Davis Instruments Pages: 16
Jetter JX3-BN-CAN Manual preview
JX3-BN-CAN
Brand: Jetter Pages: 4
K&K M5700N Manual preview
M5700N
Brand: K&K Pages: 8
K&K M4700 Manual preview
M4700
Brand: K&K Pages: 20
K&K M3500N Manual preview
M3500N
Brand: K&K Pages: 6
K&K M2500 Manual preview
M2500
Brand: K&K Pages: 3
K&K M1500 Manual preview
M1500
Brand: K&K Pages: 3
M7 SPEED R56 Installation Manual preview
R56
Brand: M7 SPEED Pages: 11
Alpine eX-10 Installation Manual preview
eX-10
Brand: Alpine Pages: 8
Ford E-Transit 2022 Manual preview
E-Transit 2022
Brand: Ford Pages: 22
Waeco MagicComfort MSH200 Installation And Operating Instructions Manual preview
MagicComfort MSH200
Brand: Waeco Pages: 108
Tusk RL-HM018R Installation Instructions And Information Manual preview
RL-HM018R
Brand: Tusk Pages: 2
Mini COOPER Owner'S Manual preview
COOPER
Brand: Mini Pages: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Brand: Right Weigh Pages: 16
SCC Quik Grip Installation And Removal Instructions preview
Quik Grip
Brand: SCC Pages: 4
Pyle PLDCP3 User Manual preview
PLDCP3
Brand: Pyle Pages: 2
SNIPER V2 Inox Owner'S Manual preview
V2 Inox
Brand: SNIPER Pages: 2

Brands by name

Popular brands

Load more brands