manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Before You Drive

Occupant Safety

1.53

and is positioned at the lowest 
height. A manual passenger’s seat 
does not have height adjustment.

WARNING: If the child restraint 
system has not been fitted 
correctly, the child cannot be 
restrained in an accident or sudden 
braking and could be injured. When 
fitting a child restraint system, 
observe the manufacturer’s 
instructions on the correct use of 
the child restraint.

KISI child restraint function

Your McLaren is fitted with a KISI system 
which is an automatic locking seat belt on 
the passenger’s side designed to temporarily 
lock the seat belt to securely hold the child 
restraint in the passenger’s seat.

1. Extend the passenger’s seat belt fully. 

The KISI system only engages when the 
seat belt is fully extended.

NOTE: If the vehicle is parked on a hill 
the inertia lock may stop the seat belt 
extending. If this occurs, release the 
seat belt slightly and continue to 
extend the seat belt carefully to avoid 
the engagement of the inertia lock.

2. Pass the seat belt through the child 

restraint as described by the child 
restraint manufacturer and engage the 
belt latch in the buckle.

3. Adjust the belt so that the lower 

section is tight against the restraint 
and allow the upper section to retract. 
The KISI system will click as the belt 
retracts.

4. When the seat belt has retracted as far 

as possible, pull on the upper section to 
check that the seat belt has locked.

NOTE: The KISI system will disengage 
when the seat belt has fully retracted 
and can then be worn as a normal seat 
belt. Once the KISI system has 
unlocked, it will be necessary to fully 
extend the seat belt to engage the 
KISI system the next time a child 
restraint is used.

Tether strap anchorages

WARNING: Child restraint 
anchorages are designed to 
withstand only those loads imposed 
by correctly fitted child restraints. 
Under no circumstances are they to 
be used for adult seat belts, 
harnesses or for attaching other 
items or equipment to the vehicle.

WARNING: When fitting a child 
restraint, always pass the upper 
tether strap over the top of the seat 
back.

Always ensure that if an upper 
tether is provided, it is secured and 
tightened fully, as this provides 
maximum protection for a child.

p13.book  Page 53  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

U.S. General 97845 Set Up And Operating Instructions preview
97845
Brand: U.S. General Pages: 5
Baja Designs S8 Instructions Manual preview
S8
Brand: Baja Designs Pages: 6
PAC RadioPRO 5 RP5-GM41 Quick Start Manual preview
RadioPRO 5 RP5-GM41
Brand: PAC Pages: 3
Honda HRM3000 User Manual preview
HRM3000
Brand: Honda Pages: 73
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
Lexus LX 470 Owner'S Manual preview
LX 470
Brand: Lexus Pages: 369
Mountain Top Sports Bar Installation Manual preview
Sports Bar
Brand: Mountain Top Pages: 12
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
Ranger design 1525-NS Installation Manual preview
1525-NS
Brand: Ranger design Pages: 22
National Cycle Quantum hardcoated N30216 Assembly Instructions And Owner'S Manual preview
Quantum hardcoated N30216
Brand: National Cycle Pages: 3
JKS JKSOGS960 Installation Instructions Manual preview
JKSOGS960
Brand: JKS Pages: 6
Volvo S90 2018 Quick Manual preview
S90 2018
Brand: Volvo Pages: 42
POOL-LINE 110050 Assembly Instructions preview
110050
Brand: POOL-LINE Pages: 2
TOPPOINT LT95090 Quick Start Manual preview
LT95090
Brand: TOPPOINT Pages: 2
Volvo S90 - ACCESSORY PANEL Owner'S Manual Supplement preview
S90 - ACCESSORY PANEL
Brand: Volvo Pages: 166
Oldsmobile 1994 Bravada Owner'S Manual preview
1994 Bravada
Brand: Oldsmobile Pages: 248
Mobridge DA-G2 MOST150 Manual preview
DA-G2 MOST150
Brand: Mobridge Pages: 20
Butts of Bawtry TBT4700 Quick Start Manual preview
TBT4700
Brand: Butts of Bawtry Pages: 2

Brands by name

Popular brands

Load more brands