manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Maintaining Your McLaren

Fluid Topping Up

5.6

Coolant

Coolant is a mixture of water and 
antifreeze/corrosion inhibitor. Only check 
the coolant when the vehicle is positioned 
on level ground and the engine is cool.

Topping up the coolant

WARNING: The cooling system is 
pressurized. Only unscrew the cap 
when the engine is cool. You could 
be scalded by hot escaping coolant if 
you attempt to unscrew the cap 
whilst the engine is still warm.

WARNING: Coolant is highly 
flammable. Fire, naked flames and 
smoking are prohibited when 
handling coolant.

WARNING: Coolant is toxic. Keep 
containers sealed and away from 
children. If coolant is accidentally 
consumed, seek medical help 
straight away.

WARNING: Never top up the engine 
oil and the coolant at the same time 
as there is a risk of cross 
contamination.

WARNING: If the engine is stopped 
due to the Eco Start-Stop System 
you should be aware that the engine 
may restart without warning.

NOTE: The engine must be switched 
off before carrying out the coolant 
level check and top up process.

Coupe

1. Open the service cover.

See Service Cover - Coupe and Spider, 
page 1.13.
See Service Cover - GT, page 1.14.

2. Slowly unscrew the cap by half a turn 

anti-clockwise and allow excess 
pressure to escape.

3. Unscrew the cap fully and remove it.

GT

4. The coolant level is correct when it is 

between the lower and upper steps 
inside the filler neck.

5. Top up if necessary.

p13.book  Page 6  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

UMBRA RIMORCHI 39030 Installation Instructions Manual preview
39030
Brand: UMBRA RIMORCHI Pages: 18
Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
RAM Ram Dodge 2010 Owner'S Manual preview
Ram Dodge 2010
Brand: RAM Pages: 616
Nav TV AUDI-P60H Install Manual preview
AUDI-P60H
Brand: Nav TV Pages: 9
Honda Clarity 2018 Owner'S Manual preview
Clarity 2018
Brand: Honda Pages: 81
ULTIMATE SPEED 279746 Assembly And Safety Advice preview
279746
Brand: ULTIMATE SPEED Pages: 6
Metra Electronics 99-7860 Installation Instructions preview
99-7860
Brand: Metra Electronics Pages: 5
Renkforce RF-4743771 Operating Instructions preview
RF-4743771
Brand: Renkforce Pages: 4
r.LiNK RL2-MMI3G-GW Manual preview
RL2-MMI3G-GW
Brand: r.LiNK Pages: 21
ZAPTEC ZapCharger Portable C1 User Manual preview
ZapCharger Portable C1
Brand: ZAPTEC Pages: 20
Bestop 51252 Installation Instructions preview
51252
Brand: Bestop Pages: 4
Voxx Electronics CA-510a Installation Instructions Manual preview
CA-510a
Brand: Voxx Electronics Pages: 15
Mobridge DA-G2 MOST150 Manual preview
DA-G2 MOST150
Brand: Mobridge Pages: 20
MBRP 0130717 Assembly preview
0130717
Brand: MBRP Pages: 5
Gentex ADVGEN20A Manual preview
ADVGEN20A
Brand: Gentex Pages: 2
GMC 2008 Savana Van Owner'S Manual preview
2008 Savana Van
Brand: GMC Pages: 402
Kuda 293950 Installation Instruction preview
293950
Brand: Kuda Pages: 3
Blue Ox BX1120 Installation Instructions preview
BX1120
Brand: Blue Ox Pages: 5

Brands by name

Popular brands

Load more brands