manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Comfort and Convenience

Climate Control

4.9

from the vents, the blower speed will 
then increase to the requested 
setting.

Touch the + button to increase the blower 
speed, or touch the - button to decrease 
blower speed. Alternatively, touch the fan 
icon and drag it to the desired setting.

If in automatic mode, adjusting the blower 
speed will cause the AUTO button to 
extinguish.

Press the AUTO button to return to 
automatic mode.

Air Distribution Settings

The air distribution can be set using the 
air-distribution controls.

Press the top screen area to direct air to the 
windscreen, press the middle screen area to 
direct air to the center air vents, press the 
bottom screen area to direct air to the 
footwell vents.

All three screen areas, a combination of any 
two or an individual area can be selected at 
any time.

When an air distribution screen area is 
pressed, the screen icon will illuminate.

Dashboard Air Vents

Turn a quarter turn in either direction until 
the vent is open or closed.

p13.book  Page 9  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

Jeep GRAND CHEROKEE 2023 Information Manual preview
GRAND CHEROKEE 2023
Brand: Jeep Pages: 108
IAG IAG-ENG-5003BK Instructions preview
IAG-ENG-5003BK
Brand: IAG Pages: 3
Camcar 40061 Fe Mounting Instructions preview
40061 Fe
Brand: Camcar Pages: 2
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
Gator GX5HDKT User Manual preview
GX5HDKT
Brand: Gator Pages: 8
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Uebler X21 nano Mounting And Operating Instructions preview
X21 nano
Brand: Uebler Pages: 56
Q Mobility Group Q Access Alpha GSE 2023 Installation Manual preview
Q Access Alpha GSE 2023
Brand: Q Mobility Group Pages: 9
TATA Motors Tata Indigo Diesel Owner'S Manual & Service Book preview
Tata Indigo Diesel
Brand: TATA Motors Pages: 190
Safe Fleet Prime Design HBR-E-FT33B Assembly Instructions Manual preview
Prime Design HBR-E-FT33B
Brand: Safe Fleet Pages: 12
Sears 580.32601 Owner'S Manual preview
580.32601
Brand: Sears Pages: 41
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
Beper P205DIF100 Manual preview
P205DIF100
Brand: Beper Pages: 52
Mitsubishi MOTORS PAJERO SPORT Manual preview
PAJERO SPORT
Brand: Mitsubishi MOTORS Pages: 416
Mynew Portable Car Umbrella User Manual preview
Portable Car Umbrella
Brand: Mynew Pages: 5
Mazda 2008 B2300 Truck Owner'S Manual preview
2008 B2300 Truck
Brand: Mazda Pages: 280

Brands by name

Popular brands

Load more brands