manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Driving Controls

Active Speed Limiter (ASL)

2.41

Active Speed Limiter (ASL)

Setting an upper speed limit

WARNING: It is the driver’s 
responsibility to keep within proper 
speed limits.

WARNING: The ASL feature may 
allow the vehicle to exceed the 
upper speed limit in certain 
situations, for example when 
descending steep gradients.

NOTE: ASL can be activated when the 
vehicle is stationary. The upper speed 
limit will be set to a default speed of 
20 mph (30 kph).

The ASL control allows the driver to set an 
upper speed limit.

Selecting a speed

1. Press the button on the end of the 

cruise control stalk, to select ASL mode.

2. Accelerate or decelerate the vehicle to 

the maximum permitted speed.

3. Push the stalk up briefly to select the 

desired ASL upper speed limit.

4. The upper speed limit appears on the 

instrument cluster.

NOTE: The ASL can be overridden by 
depressing the throttle beyond a 
predetermined point.

p13.book  Page 41  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

Federal Signal Corporation 7000 Assembly Instructions Manual preview
7000
Brand: Federal Signal Corporation Pages: 13
UnderCover 2110 Installation Manual preview
2110
Brand: UnderCover Pages: 16
Mercedes-Benz 2013 C-Class Coupe Owner'S Manual preview
2013 C-Class Coupe
Brand: Mercedes-Benz Pages: 388
Standby L54 Manual preview
L54
Brand: Standby Pages: 10
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
Jaeger J05252127 Fitting Instructions Manual preview
J05252127
Brand: Jaeger Pages: 17
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
Yakima RimROC Instructions Manual preview
RimROC
Brand: Yakima Pages: 12
Axxess AXDSPX-VW1 Installation Instructions Manual preview
AXDSPX-VW1
Brand: Axxess Pages: 16
Unex OBU-352EC Quick Start Manual preview
OBU-352EC
Brand: Unex Pages: 30
Kia Bluetooth Phone System 2010 Reference Manual preview
Bluetooth Phone System 2010
Brand: Kia Pages: 16
RAM Truck 2014 Owner'S Manual preview
Truck 2014
Brand: RAM Pages: 330
Vauxhall Crossland X 2017 Owner'S Manual preview
Crossland X 2017
Brand: Vauxhall Pages: 245
Saab 2006 9-5 Owner'S Manual preview
2006 9-5
Brand: Saab Pages: 288
BENDIX C-5 CUT OUT COCK Manual preview
C-5 CUT OUT COCK
Brand: BENDIX Pages: 2
ZeroRPM IMS2 Operator'S Manual preview
IMS2
Brand: ZeroRPM Pages: 41
SMART cabriolet Maintenance Booklet preview
cabriolet
Brand: SMART Pages: 26
Mont Blanc 785003 Fitting Instructions Manual preview
785003
Brand: Mont Blanc Pages: 10

Brands by name

Popular brands

Load more brands