manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Maintaining Your McLaren

Emergency Equipment

5.12

Setting up the warning triangle

Fold the legs 

(1)

 sideways from the bottom.

Pull side reflectors 

(2)

 upwards to form a 

triangle and lock them at the top using 
press-stud 

(3)

.

Place the warning triangle at an appropriate 
distance from the vehicle to warn other 
traffic of a breakdown.

First Aid kit

The first aid kit 

(2)

 is located at the front of 

the luggage compartment.

NOTE: Check the expiry dates of the 
first aid kit materials every 12 months, 
and replace them if necessary.

Tire sealant

The tire sealant 

(3)

 is located at the front of 

the luggage compartment.

For instructions on how to use the tire 
sealant, see Deflated tire, page 5.36.

NOTE: Check the expiry date of the tire 
sealant every 12 months, and replace 
if necessary.

p13.book  Page 12  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

ZAPTEC Go Instruction Manual preview
Go
Brand: ZAPTEC Pages: 240
Parrot CK 3000 Evolution Specifications preview
CK 3000 Evolution
Brand: Parrot Pages: 2
Wagan 2227-1 User Manual preview
2227-1
Brand: Wagan Pages: 8
Thermo King T- series Driver Manual To Simple Operation preview
T- series
Brand: Thermo King Pages: 2
Actia SmarTach Manual preview
SmarTach
Brand: Actia Pages: 102
Whelen Engineering Company FastTrax FTF4 Installation Manual preview
FastTrax FTF4
Brand: Whelen Engineering Company Pages: 9
NanoCam Plus NCP-MIRDVR522 User Manual preview
NCP-MIRDVR522
Brand: NanoCam Plus Pages: 32
JKS JKSOGS960 Installation Instructions Manual preview
JKSOGS960
Brand: JKS Pages: 6
v.link NAL-PC-HSD Manual preview
NAL-PC-HSD
Brand: v.link Pages: 21
Rostra RearSight 250-8308 Installation Instructions preview
RearSight 250-8308
Brand: Rostra Pages: 2
Mynew Portable Car Umbrella User Manual preview
Portable Car Umbrella
Brand: Mynew Pages: 5
Black+Decker BXAE00011 Operating Instructions Manual preview
BXAE00011
Brand: Black+Decker Pages: 21
Beeper RW050RF User& Installer'S Manual preview
RW050RF
Brand: Beeper Pages: 20
Mercedes-Benz 2007 SLR Mclaren Operator'S Manual preview
2007 SLR Mclaren
Brand: Mercedes-Benz Pages: 425
KLAUS Multiparking trendvario6X00 Service Manual preview
trendvario6X00
Brand: KLAUS Multiparking Pages: 72
Kuda 076100 Installation Instruction preview
076100
Brand: Kuda Pages: 3
Wald Black Bison Sports Series Installation Manual preview
Black Bison Sports Series
Brand: Wald Pages: 7
Blitz BZCAPT30 User Manual preview
BZCAPT30
Brand: Blitz Pages: 4

Brands by name

Popular brands

Load more brands