manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Driving Controls

Starting and Driving

2.14

Exhaust Temperature Monitoring

The vehicle continuously monitors exhaust 
temperatures to protect the catalytic 
converters from damage caused by 
overheating.

If excessive exhaust temperatures are 
measured, a warning will be displayed on the 
instrument cluster.

The vehicle speed should be reduced as 
soon as this message is observed. Refrain 
from maneuvers involving high engine 
speed and high engine load (full throttle) to 
allow the exhausts to cool. The message will 
remain until the temperature has reduced.

If the exhaust temperature remains at an 
excessive level, a second warning is 
displayed and limphome mode is activated. 
The engine performance will remain limited 
until the vehicle is restarted.

NOTE: Catalytic converter over 
temperature warnings are not likely to 
be observed during normal driving and 
are the result of extreme operating 
conditions. For example, high exhaust 
temperatures can be caused by 
extended track driving, maintaining 

high engine speed for long durations, 
and sudden and repeated changes in 
throttle demand.

NOTE: High exhaust temperatures can 
cause damage to catalytic converters 
and should be avoided by practicing 
careful driving.

If the warnings persist, contact your 
McLaren retailer.

Parking Sensors

The parking sensors alert the driver to any 
obstructions while maneuvering at low 
speeds. The system comprises four 
ultrasonic sensors in the front bumper, four 
ultrasonic sensors in the rear bumper and 
two sounders. Each sounder has a different 
pitch to indicate whether the obstruction is 
at the front or the rear of the vehicle.

The front parking sensors are automatically 
switched on when the engine is running and 
drive is selected. The rear parking sensors 
are switched on when reverse gear is 

p13.book  Page 14  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

RAM Commercial PROMASTER 2020 Quick Reference Manual preview
PROMASTER 2020
Brand: RAM Commercial Pages: 12
Quadratec QuadraTop Adventure Top S Installation Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 20
RAM CHASSIS CAB 3500 2017 Quick Reference Manual preview
CHASSIS CAB 3500 2017
Brand: RAM Pages: 16
PEUGEOT Partner Origin Handbook preview
Partner Origin
Brand: PEUGEOT Pages: 128
Schumacher Electric SPI6 Owner'S Manual preview
SPI6
Brand: Schumacher Electric Pages: 87
Cadillac 2009 ESCALADE ESV Owner'S Manual preview
2009 ESCALADE ESV
Brand: Cadillac Pages: 602
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
SuperATV Roof Installation Instructions Manual preview
Roof
Brand: SuperATV Pages: 7
Ecco 5545A Installation And Operating Instructions Manual preview
5545A
Brand: Ecco Pages: 12
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
Simplicity 1694286 Installation Instructions Manual preview
1694286
Brand: Simplicity Pages: 10
CrimeStopper CA-504.BRKT Install Manual preview
CA-504.BRKT
Brand: CrimeStopper Pages: 1
MVG 0845 C Manual preview
0845 C
Brand: MVG Pages: 18
Mitsubishi MOTORS PAJERO SPORT Manual preview
PAJERO SPORT
Brand: Mitsubishi MOTORS Pages: 416
Prorack K663 Fitting Instructions Manual preview
K663
Brand: Prorack Pages: 15

Brands by name

Popular brands

Load more brands