McLaren coupe series Owner'S Handbook Manual Download Page 43

Page: 43 / 272

Before You Drive

Anti-Theft System

1.31

Anti-Theft System

Alarm system

A visual and audible alarm is triggered if the
alarm system is armed and any of the
following are opened:

•

a door

•

the service cover

•

the luggage compartment lid

•

the tonneau cover (Spider only)

NOTE: The alarm remains triggered
even if you close the open aperture. To
silence the alarm, unlock the vehicle.

The alarm system also incorporates the
following features:

•

tow-away protection

•

interior motion sensor

•

center console stowage compartment

NOTE: The center console stowage
compartment must be closed for the
interior motion sensor or the Auto
Alarm to become armed.

Arming the alarm system

1. Lock the vehicle (using the keyless

system or the key fob). The anti-theft
alarm system will be armed after
approximately 5 seconds.

2. The light in the central locking button

will illuminate for approximately
60 seconds after locking the vehicle.

Disarming the alarm system

1. Unlock the vehicle (using the keyless

system or the key fob), the alarm will
disarm and the light in central locking
button will stop flashing.

Immobilizer

The immobilizer prevents your McLaren from
being started by an unauthorized person.

The vehicle is automatically immobilized
when it senses that there is no key fob
present in the vehicle.

Remobilization occurs when a key fob is
sensed inside the vehicle.

NOTE: Immobilization will only occur if
the engine is not running.

p13.book Page 31 Wednesday, April 26, 2017 9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Search results

Summary of Contents for coupe series

Reviews:

Related manuals for coupe series

Brands by name

Popular brands

McLaren coupe series, Owner'S Handbook Manual

Search results

Summary of Contents for coupe series

Reviews:

Related manuals for coupe series

Brands by name

Popular brands