McLaren coupe series Owner'S Handbook Manual Download Page 149

Page: 149 / 272

Instruments

Instrument Cluster Display

3.19

Internal Lighting

Select one of the following to adjust the
illumination level:

•

Switch Lighting

•

Footwell Lighting

Press the control stalk down to quickly
access switch lighting. A confirmation tone
will be heard.

A gauge will appear. Move the control stalk
up or down

( or -)

to highlight your

preferred brightness level.

Press and hold the

button on the end of

the control stalk to confirm your choice.

Select courtesy lighting and pull the control
stalk towards you to toggle the option ‘ON’ or
‘OFF’.

Press and hold the

button on the end of

the control stalk to confirm your choice.

Vehicle

It is possible to make the following
selections:

•

Intake Sound Generator (ISG) (if fitted),
page 3.20

•

Valet Mode, page 3.21

•

Reverse Select Tone, page 3.22

•

Performance Shift Cue (PSC), page 3.22

•

Navigation, page 3.23

•

Auto Door Lock, page 3.23

•

Auto Fold Mirrors, page 3.23

•

Auto Alarm, page 3.23

•

Road Speed Limit, page 3.23

•

Door Unlock, page 3.23

•

Comfort Entry/Exit, page 3.23

•

Start Button Pulse, page 3.23

•

Silent Lock, page 3.24

•

Reverse Mirror Dip, page 3.24

•

Tire Type, page 3.25

•

Wiper Modes, page 3.25

•

Wiper Sensitivity, page 3.25

p13.book Page 19 Wednesday, April 26, 2017 9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Search results

Summary of Contents for coupe series

Reviews:

Related manuals for coupe series

Brands by name

Popular brands

McLaren coupe series, Owner'S Handbook Manual

Search results

Summary of Contents for coupe series

Reviews:

Related manuals for coupe series

Brands by name

Popular brands