McLaren coupe series, Owner'S Handbook Manual

Page: 153 / 272

Instruments
Instrument Cluster Display
3.23
Navigation
When ‘DISPLAY ON’ is selected, current
navigation turn-by-turn guidance will be
displayed on the instrument cluster if route
guidance has been started using IRIS. See
Navigation, page 3.27.
If ‘DISPLAY OFF’ is selected, the turn-by-turn
guidance on the instrument cluster will be
disabled.
Press and hold the OK button on the end of
the control stalk to confirm your choice.
NOTE: This option has no effect on the
operation of the navigation system on
IRIS.
Auto Door Lock
When you receive the vehicle, auto door lock
will be set to on.
The vehicle doors will automatically lock as
the vehicle moves off.
Switch auto door lock off, and the doors
remain unlocked after moving off, unless,
they are locked manually.
Press and hold the OK button on the end of
the control stalk to confirm your choice.
Auto Fold Mirrors
When ‘ON’ is selected the exterior mirrors
will fold as the vehicle is locked and unfold
when the door is opened. If ‘OFF’ is selected,
the mirrors will remain in their driving
position.
Press and hold the OK button on the end of
the control stalk to confirm your choice.
Auto Alarm
With auto alarm selected, the vehicle will
automatically lock and the alarm set if
unlocked and left for 30 seconds with all
doors, luggage compartment lid and service
access panels left fully closed.
Press and hold the OK button on the end of
the control stalk to confirm your choice.
Road Speed Limit
When ‘ON’ is selected the speed limit for the
current road will be displayed on the
instrument cluster if available.
Press and hold the OK button on the end of
the control stalk to confirm your choice.
Door Unlock
When ‘DRIVER’ is selected, only the driver’s
door will unlock when the vehicle is unlocked
with either the key fob or door button.
When ‘BOTH’ is selected, both doors will
unlock when the vehicle is unlocked using
either the key fob or door button.
All closures will lock with either ‘DRIVER’ or
‘BOTH’ selected.
Press and hold the OK button on the end of
the control stalk to confirm your choice.
Comfort Entry/Exit
When comfort entry/exit is ‘ON’, the driver’s
seat will move fully rearwards and to its
lowest position when the ignition is off and
the driver’s door is opened. Seat memory -
stalk return is activated along with this
option, see Comfort entry, page 1.39.
When comfort entry/exit is ‘OFF’, the driver’s
seat will remain in position at all times.
Press and hold the OK button on the end of
the control stalk to confirm your choice.
Start Button Pulse
When ‘ON’ is selected, the START/STOP
button illumination will pulse, when the
vehicle is in Awake, Accessory or Ignition
p13.book Page 23 Wednesday, April 26, 2017 9:22 PM