manualshive.com logo in svg

McLaren coupe series, Owner'S Handbook Manual

The McLaren Coupe Series Owner's Handbook Manual is a comprehensive guide for all McLaren coupe owners. This manual provides detailed instructions and essential information to ensure optimal performance and maintenance of your vehicle. Download this manual for free at manualshive.com to access valuable insights directly from the manufacturer.

Share
Download
background image

Maintaining Your McLaren

Fluid Topping Up

5.5

Top up quantity

Based on the oil status displayed on the 
instrument cluster, add the required 
quantity of oil as shown in the following 
table.

Oil temperature

If the oil temperature is too high, a warning 
will be displayed on the instrument cluster. 
Reduce the vehicle and engine speed until 
the warning message disappears.

Gearbox oil level

If you experience oil loss or problems with 
gear shifts, have the gearbox checked by 
your McLaren retailer.

NOTE: The clutch and gearbox oil has 
mileage related service intervals. This 
maintenance can only be carried out 
by your McLaren retailer.

Segments on display

Quantity of oil 
required

1 - red - under filled

2.0 pt. (1.00 liter)

2 - yellow - min.

1.5 pt. (0.75 liter)

3 - green - OK

1.0 pt. (0.50 liter)

4 - green - OK

0.5 pt. (0.25 liter)

5 - green - OK

0.2 pt. (0.10 liter)

6 - green - target

0.0 pt. (0.00 liter)

7 - yellow - max.

0.0 pt. (0.00 liter)

8 - red - overfilled

Contact your 
McLaren retailer

Segments on display

Quantity of oil 
required

p13.book  Page 5  Wednesday, April 26, 2017  9:22 PM

Summary of Contents for coupe series

















































































































































































































































































Reviews:

No comments

Related manuals for coupe series

LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Velleman CAMCOLC1N User Manual preview
CAMCOLC1N
Brand: Velleman Pages: 6
Webasto Transit Vancouver Wagon Manual preview
Transit Vancouver Wagon
Brand: Webasto Pages: 44
Actia SmarTach Manual preview
SmarTach
Brand: Actia Pages: 102
Thule 1430 Kit Instructions Manual preview
1430 Kit
Brand: Thule Pages: 8
Meta System 900000358 Installation Technical Sheet preview
900000358
Brand: Meta System Pages: 22
Draw tite 24963 Installation Instructions preview
24963
Brand: Draw tite Pages: 4
EFILive CM2350B User Manual preview
CM2350B
Brand: EFILive Pages: 25
Cadillac GMC Yukon Denali 2005 Owner'S Manual preview
GMC Yukon Denali 2005
Brand: Cadillac Pages: 456
Saab 900 5 Speed Technical Training Manual preview
900 5 Speed
Brand: Saab Pages: 63
R&G LP0291BK Fitting Instructions Manual preview
LP0291BK
Brand: R&G Pages: 20
Whispbar S17W Fitting Instructions Manual preview
S17W
Brand: Whispbar Pages: 70
Fisher Body FOLDING TOP 1971 Service Manual preview
FOLDING TOP 1971
Brand: Fisher Body Pages: 37
Manik 519952T Installation Instructions preview
519952T
Brand: Manik Pages: 2
Prime Design URX-001-E Assembly Instructions Manual preview
URX-001-E
Brand: Prime Design Pages: 8
Kargo Master 80070 Instruction Manual preview
80070
Brand: Kargo Master Pages: 17
Directed Directechs FORD11 Installation Manual preview
Directechs FORD11
Brand: Directed Pages: 23

Brands by name

Popular brands

Load more brands