Mazda MX-30 2020, Owner'S Manual

Page: 453 / 618

8. Make sure that the blade rubber is
correctly installed to the blade
holder.
9. Slide the blade component and
install it to the wiper arm.
10.Slowly lower the wiper arms onto
the windscreen.
CAUTION
To prevent damage to the
windscreen let the wiper arm down
easily, do not let it slap down on
the windscreen.
11.Move the wipers to their initial
positions using the following
procedure.
a) Make sure that the wipers are set
on the windscreen.
b) Switch the power switch ON.
c) Press up the wiper switch to the
MIST position 1 time.
When the procedure is
completed, the wipers operate
and they stop at the initial
positions.
▼
Replacing Rear Window Wiper
Blade
When the wiper no longer cleans well,
the blade is probably worn or cracked.
Replace it.
CAUTION
To prevent damage to the wiper arm
and other components, do not move
the wiper by hand.
1. Raise the wiper arm and rotate the
wiper blade to the right until it
unlocks, then remove the blade.
CAUTION
To prevent damage to the rear
window, do not let the wiper arm
fall on it.
Maintenance and Care
Owner Maintenance
6-20