manualshive.com logo in svg

Mazda MX-30 2020, Owner'S Manual, Page: 210 / 618

Share
Download
Mazda MX-30 2020 Owner'S Manual Download Page 210

NOTE

While the position lights are turned on,
the rear fog light remains on even if the
headlights are turned off. The rear fog
light turns off when the position lights
turn off.

Turn and Lane-Change

Signals

▼

Turn and Lane-Change Signals

The turn and lane-change signals can
be used when the power switch is
switched ON.

▼

Direction Indicators

Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel
after the turn is completed.
 
If the indicator light continues to flash
after a turn, manually return the lever
to its original position.

1. Right turn
2. Right lane change
3. OFF
4. Left lane change
5. Left turn
 
The direction indicators in the
instrument cluster flash according to
the operation of the direction indicator
lever to show which signal is working.
 

When Driving

Switches and Controls

4-43

Summary of Contents for MX-30 2020











































































































































































































































































































































































































































































































































































































































Reviews:

No comments