Mazda MX-30 2020, Owner'S Manual, Page: 503 / 618

What to do when
charging is not possible
▼
What to do when charging is not
possible
If trouble arises while charging such as
not being able to charge the high
voltage battery, refer to the following
table. If the problem cannot be solved
even after checking the following table,
there may be a problem with the
vehicle or charger. Contact an expert
repairer (we recommend an
Authorised Mazda Repairer).
Charging is not possible.
Cause Action
The selector
lever is in a
position
other than P.
Shift the selector lever to the P
position.
The high
voltage bat-
tery is al-
ready fully
charged.
Charging is not performed when
the high voltage battery is al-
ready fully charged.
The high
voltage bat-
tery temper-
ature is ex-
tremely high
or low. Check the high voltage battery
temperature gauge in the instru-
ment cluster. If the high voltage
battery temperature gauge is in
the red or blue range, charging
may not be possible.
The
Lead-acid
battery is
depleted.
If the instrument cluster does not
turn on even if the power switch
is switched ON, the Lead-acid
battery may be depleted. Charge
or replace the Lead-acid battery.
Normal charging is not possible.
Cause Action
The outlet
has no pow-
er.
Check if a ground-fault circuit in-
terrupter has operated or if a
power outage occurred. If the
power source has a timer func-
tion, electrical power may not be
supplied to the outlet until the
time set to supply power. In ad-
dition, with a mechanical park-
ing garage, electrical power may
be cut off until the parking pallet
is completely stored or while the
elevator is operating.
The charge
plug is not
properly
plugged into
the outlet.
Check if the charge plug is prop-
erly plugged into the outlet.
The charge
connector is
not properly
connected.
Check if the charge connector is
properly connected.
Charging
timer is set.
Cancel the charging timer using
EV Settings in Mazda Connect,
or the charging timer cancella-
tion function.
Troubleshooting for functions using a
Smartphone or computer
If you are having trouble with the
remote function service, such as when
the remote function does not work,
refer to the Connected Service owner’s
manual.
If Trouble Arises
Troubleshooting for Charging
7-22