Mazda MX-30 2020, Owner'S Manual

Page: 281 / 618

x
A vehicle overtakes your vehicle
while it is stopped.
x
Your vehicle is in an area where
strong radio waves or electrical
noise may occur such as near a
television tower or power plant.
x
In the following cases, the
i-ACTIVSENSE warning indication/
warning light turns on and operation
of the system is stopped. If the
i-ACTIVSENSE warning indication/
warning light remains illuminated,
have the vehicle inspected at an
expert repairer (we recommend an
Authorised Mazda Repairer) as soon
as possible.
x
Some problem with the system
including the Blind Spot
Monitoring (BSM) warning
indicator lights has occurred.
x
A large deviation in the installation
position of a rear side radar sensor
on the vehicle has occurred.
x
There is a large accumulation of
snow or ice on the rear bumper
near a rear side radar sensor.
x
Driving on snow-covered roads for
long periods.
x
The temperature near the radar
sensors becomes extremely hot
due to driving for long periods on
slopes during the summer.
x
The lead-acid battery voltage has
decreased.
x
Under the following conditions, the
rear side radar sensor cannot detect
approaching vehicles or it might be
difficult to detect them, and the
system may not operate normally.
x
The vehicle speed when reversing
is about 15 km/h (9 mph) or
faster.
x
The rear side radar sensor
detection area is obstructed by a
nearby wall or parked vehicle.
(Reverse the vehicle to a position
where the radar sensor detection
area is no longer obstructed.)
1. Your vehicle
x
A vehicle is approaching directly
from the rear of your vehicle.
1. Your vehicle
x
The vehicle is parked at an angle.
1. Your vehicle
x
Directly after the RCTA system
becomes operable using [Settings]
in Mazda Connect.
x
Radio wave interference from a
radar sensor equipped on a nearby
parked vehicle.
When Driving
i-ACTIVSENSE
4-114