Mazda MX-30 2020 Owner'S Manual Download Page 527

Page: 527 / 618

Display

*1*2

Content

Action to be taken

Cruising & Traffic Sup-
port Operation Cancel-
led. Drive Safely

This message is indicated when the
Cruising & Traffic Support (CTS) have
been cancelled other than by the
driver.

Have your vehicle inspected by an ex-
pert repairer (we recommend an Au-
thorised Mazda Repairer).

Distance & Speed Alert
Operation Cancelled
Drive Safely

This message is indicated when the
Distance & Speed Alert (DSA) have
been cancelled other than by the
driver.

Have your vehicle inspected by an ex-
pert repairer (we recommend an Au-
thorised Mazda Repairer).

Cruise Control Opera-
tion Cancelled. Drive
Safely

This message is indicated when the
Cruise Control have been cancelled
other than by the driver.

Have your vehicle inspected by an ex-
pert repairer (we recommend an Au-
thorised Mazda Repairer).

Emergency Braking Acti-
vated. Depress Brake
Pedal to Hold Stop

This message is indicated after the
Smart Brake Support (SBS) brakes op-
erate and when the SBS is cancelled.

Depress the brake pedal.

Touch Key Fob to Push
Button Start Switch

This message is indicated when the
key battery is weak (battery dead or
damaged key).

Touch the key against power switch
to start the EV system.
Refer to Starting the EV System When
the Key Battery is Dead on page 4-7.

Depress Brake Pedal to
Start Vehicle

This message is displayed when the
power switch is pressed without de-
pressing the brake pedal.

To start the EV system, press the pow-
er switch with the brake pedal de-
pressed.

Press Push Button Start
Switch While Turning
Steering Wheel Left or
Right

This message is indicated while the
steering wheel is locked.

Release the steering wheel lock by
pressing the start button while turn-
ing the steering wheel to the left and
right.

Check Shift Selector Lev-
er Position

Displays in the following cases:

Selector lever is shifted to R posi-
tion while driving forward.

Selector lever is shifted to P posi-
tion while driving.

Selector lever is shifted to D posi-
tion while reversing.

Check the selector lever position.

Close Door and Fasten
Seat Belt

This message is indicated when the
AUTOHOLD switch is pressed with
the driver’s seat belt unfastened or
the driver’s door open.

Fasten the driver's seat belt and press
the AUTOHOLD switch with the driv-
er’s door closed.

Wiper Blades Must Be
on Windscreen Before
Operating

This message is indicated when the
power switch is switched ON with
the wiper arms at the service posi-
tions.

Return the wiper arms to the initial
positions.

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

7-46

Summary of Contents for MX-30 2020











































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-30 2020

Reviews:

Related manuals for MX-30 2020

Brands by name

Popular brands

Mazda MX-30 2020, Owner'S Manual

Search results

Summary of Contents for MX-30 2020

Reviews:

Related manuals for MX-30 2020

Brands by name

Popular brands