manualshive.com logo in svg

Mazda MX-30 2020, Owner'S Manual, Page: 517 / 618

Share
Download
Mazda MX-30 2020 Owner'S Manual Download Page 517

“Excessive EV System Temp.
Acceleration Limited Avoid Moving at
Very Low Speeds. Depress Brake
When Not Moving” displays/turns on

When the vehicle is stopped on an
upslope or the vehicle is driven at low
speed on an upslope with the selector
lever in the D or R position, the
indication/light may display/turn on.
If necessary, park the vehicle in a safe
place and let the EV system cool down
because the output is restricted until
the EV system returns to the normal
temperature.

WARNING

When the output restriction warning
indication/warning light displays/
turns on or flashes, check the safety of
the surroundings:

The motor output decreases and the
vehicle speed decreases resulting in an
accident. If the vehicle cannot be
driven safety, stop the vehicle in a safe
place.

▼

Power Steering Malfunction
Indication/Indicator Light

The electric power steering
malfunction indication/indicator light
displays/turns on if the electric power
steering has a malfunction.
If the electric power steering
malfunction indication/indicator light
displays/turns on, stop the vehicle in a
safe place and switch the power switch
OFF.
There is no problem if the display/
illumination of the electric power
steering malfunction indication/
indicator light turns off when the EV
systems is restarted after some time
has passed. If the electric power
steering malfunction indication/
indicator light displays/turns on even
after the EV systems is restarted,
contact an expert repairer (we
recommend an Authorised Mazda
Repairer).

NOTE

x

If the message is displayed, the
power steering will not operate
normally. In this case, the steering
wheel can still be operated,
however, the operation may feel
heavy compared to normal, or the
steering wheel could vibrate when
turning.

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

7-36

Summary of Contents for MX-30 2020











































































































































































































































































































































































































































































































































































































































Reviews:

No comments