Home
/
Mazda
/
MX-30 2020
/
Owner'S Manual

Mazda MX-30 2020, Owner'S Manual, Page: 313 / 618

Share

Page: 313 / 618

Mazda MX-30 2020 Owner'S Manual Download Page 313

Manually setting the vehicle speed
limit from a speed limit sign

1. Press the LIM switch to turn the

system on.

2. Press the RES switch while the ISA

set indication is displayed on the
active driving display/instrument
cluster to set the vehicle speed limit
to the speed of the displayed speed
limit sign.

1. Speed limit sign setting indication

NOTE

x

The speed limit cannot be set from
the speed limit sign when the speed
limit sign indication is displayed in
gray.

Speed limit tolerance setting

The speed tolerance manually set for
speed limit signs can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.

x

+ 0 km/h (+ 0 mph): The set speed
is the same as the detected speed
limit sign.

x

+ 5 km/h (+ 3 mph): The set speed
can be increased by 5 km/h (3 mph)
above a detected speed limit sign
uniformly.

x

+ 10 km/h (+ 5 mph): The set speed
can be increased by 10 km/h (5
mph) above a detected speed limit
sign uniformly.

Smart Brake Support

(SBS)

▼

Smart Brake Support (SBS)

The SBS is a system designed to detect
target objects using sensors and
cameras equipped on the vehicle, and
to reduce damage in the event of a
collision by operating the brake control
if there is the possibility of your vehicle
colliding with a target object.
One part of the SBS functions when
you are driving forward and the other
part functions when you are driving in
reverse.
Refer to Forward drive detection on
page 4-146.
Refer to Reverse drive detection on
page 4-151.

▼

Forward drive detection

When you are driving forward, the
following functions of the Smart Brake
Support (SBS) operate.

x

Forward detection function

x

Turn-Across Traffic

WARNING

Do not rely completely on the SBS:

The SBS is only designed to reduce
damage in the event of a collision.
The system may not operate normally
depending on the target object,
weather conditions, or traffic
conditions. Over reliance on the
system leading to the accelerator pedal
or brake pedal being mistakenly
operated could result in an accident.

When Driving

i-ACTIVSENSE

4-146

«
...
311
312
313
314
315
...
»

Summary of Contents for MX-30 2020











































































































































































































































































































































































































































































































































































































































Reviews:

No comments