manualshive.com logo in svg

Mazda MX-30 2020, Owner'S Manual, Page: 125 / 618

Share
Download
Mazda MX-30 2020 Owner'S Manual Download Page 125

Keyless Entry System

▼

Keyless Entry System

This system uses the key buttons to
remotely lock and unlock the doors,
liftgate, and charge lid.
The system can start the EV system
without having to take the key out of
your purse or pocket.
Operating the theft-deterrent system is
also possible on theft-deterrent
system-equipped vehicles.
 
System malfunctions or warnings are
indicated by the following warning
lights or beeps.
Check the displayed message for more
information and, if necessary, have the
vehicle inspected at an expert repairer
(we recommend an Authorised Mazda
Repairer), according to the indication.

x

KEY Warning Indication/Warning
Light (Red)
Refer to KEY Warning Indication/
Warning Light (Red) on page 7-39.

x

Power switch Not Switched Off
(STOP) Warning Beep
Refer to Power switch Not Switched
Off (STOP) Warning Beep on page
7-49.

x

Key Removed from Vehicle Warning
Beep
Refer to Key Removed from Vehicle
Warning Beep on page 7-49.

If you have a problem with the key,
consult an expert repairer (we
recommend an Authorised Mazda
Repairer).
 
If your key is lost or stolen, consult an
expert repairer (we recommend an
Authorised Mazda Repairer) as soon as
possible for a replacement and to
make the lost or stolen key inoperative.

CAUTION

Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.

NOTE

x

The keyless entry system operation
may vary due to local conditions.

x

The keyless entry system is fully
operational when the power switch
is switched off. The system does not
operate if the power switch is
switched to any position other than
off.

x

If the key does not operate when
pressing a button or the operational
range becomes too small, the battery
may be weak. To install a new
battery, refer to Key Battery
Replacement (page 6-24).

x

Battery life is about 1 year. Replace
the battery with a new one if the
messages are displayed in the
instrument cluster. Replacing the
battery about once a year is
recommended because the KEY
warning indication may not display
depending on the rate of battery
depletion.

x

Additional keys can be obtained at
an Authorised Mazda Repairer. Up
to 6 keys can be used with the
keyless functions per vehicle. Bring
all keys to an Authorised Mazda
Repairer when additional keys are
required.

Before Driving

Keys

3-32

Summary of Contents for MX-30 2020











































































































































































































































































































































































































































































































































































































































Reviews:

No comments