manualshive.com logo in svg

Mazda MX-30 2020, Owner'S Manual, Page: 73 / 618

Share
Download
Mazda MX-30 2020 Owner'S Manual Download Page 73

▼

Using the Seat Belt

When installing a child-restraint
system, follow the installation
instructions included with the product.
In addition, remove the head restraint.
However, when installing a booster
seat, always install the vehicle head
restraint to the seat where the booster
seat is installed.

▼

Using ISOFIX Anchor

WARNING

Follow the manufacturer's
instructions for the use of the
child-restraint system:

An unsecured child-restraint system is
dangerous. In a sudden stop or a
collision it could move causing serious
injury or death to the child or other
occupants. Make sure any
child-restraint system is properly
secured in place according to the
manufacturer's instructions.

Make sure the child-restraint system is
properly secured:

A child-restraint system that is not
secured is dangerous. In a sudden stop
or collision, it can become a projectile
and hit someone, causing serious
injury. When not in use, remove it from
the vehicle, put it in the luggage
compartment or at least make sure it is
securely fastened to the ISOFIX
anchors.

Make sure there are no seat belts or
foreign objects near or around the
ISOFIX anchor-secured child-restraint
system:

Not following the child-restraint system
manufacturer's instructions when
installing the child-restraint system is
dangerous. If seat belts or a foreign
object prevent the child-restraint
system from being securely attached to
the ISOFIX anchors and the
child-restraint system is installed
improperly, the child-restraint system
could move in a sudden stop or
collision causing serious injury or death
to the child or other occupants. When
installing the child-restraint system,
make sure there are no seat belts or
foreign objects near or around the
ISOFIX anchors. Always follow the
child-restraint system manufacturer's
instructions.

1. First, adjust the front seat to allow

clearance between the
child-restraint system and the front
seat.
Refer to Adjusting the Driver's Seat
on page 2-4.
Refer to Adjusting the Front
Passenger's Seat on page 2-12.

2. Make sure the seatback is securely

latched by pushing it back until it is
fully locked.

Essential Safety Equipment

Child Restraint

2-46

Summary of Contents for MX-30 2020











































































































































































































































































































































































































































































































































































































































Reviews:

No comments