manualshive.com logo in svg

Mazda MX-30 2020, Owner'S Manual, Page: 242 / 618

Share
Download
Mazda MX-30 2020 Owner'S Manual Download Page 242

¾

Consult an expert repairer (we
recommend an Authorised Mazda
Repairer) regarding cleaning of the
camera lens.

¾

Do not place objects on the
instrument panel which reflect light.

¾

Do not apply accessories, stickers or
film to the windscreen near the
Forward Sensing Camera (FSC).
If the area in front of the Forward
Sensing Camera (FSC) lens is
obstructed, it will cause the system
to not operate correctly.
Consequently, each system may not
operate normally which could lead
to an unexpected accident.

¾

Always keep the windscreen glass
around the camera clean by
removing dirt or fogging. Use the
windscreen defroster to remove
fogging on the windscreen.

¾

The Forward Sensing Camera (FSC)
includes a function for detecting a
soiled windscreen and informing the
driver, however, depending on the
conditions, it may not detect plastic
shopping bags, ice or snow on the
windscreen. In such cases, the
system cannot accurately determine
a vehicle ahead and may not be able
to operate normally. Always drive
carefully and pay attention to the
road ahead.

¾

When cleaning the windscreen, do
not allow glass cleaners or similar
cleaning fluids to get on the Forward
Sensing Camera (FSC) lens. In
addition, do not touch the Forward
Sensing Camera (FSC) lens.

¾

Consult an expert repairer (we
recommend an Authorised Mazda
Repairer) regarding cleaning the
interior side of the windscreen
around the Forward Sensing Camera
(FSC).

¾

If there are recognizable cracks or
damage caused by flying gravel or
debris on the windscreen, always
have the windscreen replaced.
Consult an expert repairer (we
recommend an Authorised Mazda
Repairer) for replacement.

¾

Consult an expert repairer (we
recommend an Authorised Mazda
Repairer) before performing repairs
around the Forward Sensing Camera
(FSC).

¾

When performing repairs around the
rearview mirror, consult an expert
repairer (we recommend an
Authorised Mazda Repairer).

¾

Always use tyres for all wheels that
are of the specified size, and the
same manufacturer, brand, and tread
pattern. In addition, do not use tyres
with significantly different wear
patterns on the same vehicle as the
system may not operate normally.

NOTE

x

If the Forward Sensing Camera (FSC)
cannot operate normally due to rain,
backlight, or fog, the system
functions related to the Forward
Sensing Camera (FSC) are
temporarily stopped and the
following warning lights turn on.
However, this does not indicate a
malfunction.

x

HBC warning indication/warning
light (amber)

x

ALH warning indication/warning
light (amber)

x

i-ACTIVSENSE warning indication/
warning light

When Driving

i-ACTIVSENSE

4-75

Summary of Contents for MX-30 2020











































































































































































































































































































































































































































































































































































































































Reviews:

No comments