Mazda MX-30 2020, Owner'S Manual, Page: 284 / 618

Do not get out of the vehicle while
the stop hold control is operating.
Getting out of the vehicle while the
stop hold control is operating is
dangerous as the vehicle may move
unexpectedly and result in an accident.
Before leaving the vehicle, switch the
MRCC with Stop & Go function off,
shift the selector lever to the P
position, and apply the parking brake.
NOTE
x
The MRCC with Stop & Go function
does not operate with the following
objects.
x
On-coming vehicles
x
Pedestrians
x
Stationary objects (such as
stopped vehicles, obstructions)
x
If a vehicle ahead is travelling at an
extremely low speed, the system may
not detect it correctly.
x
A brake operation sound may be
heard by the MRCC with Stop & Go
function control, however it does not
indicate a problem.
x
The brake lights turn on while the
brakes and stop hold control are
operating by the MRCC with Stop &
Go function control.
x
If the distance between vehicles
control is disabled using [Settings] in
Mazda Connect, the MRCC with
Stop & Go function switches to
cruise control.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
▼
Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) Display
Indication
The setting status and operation
conditions of the MRCC with Stop &
Go function are indicated on the
multi-information display and the
active driving display.
Multi-information Display (Basic
display)
1. Vehicle ahead display
2. MRCC with Stop & Go function set
vehicle speed
Multi-information Display
(i-ACTIVSENSE display)
1. Vehicle ahead display
2. MRCC with Stop & Go function set
vehicle speed
When Driving
i-ACTIVSENSE
4-117