Mazda MX-30 2020, Owner'S Manual

Page: 120 / 618

*
1 If a list selected using the cursor has been
set, the item can be Enable or Disable.
*
2 Settings can be Edit/Delete by sliding a list
selected using the cursor to the right.
NOTE
x
The charging timer does not work
immediately after the lead-acid
battery is removed or installed, or
when no GPS signal has been
received. When charging without
receiving GPS, quick charging begins.
When GPS signals are received, the
charging timer becomes operational.
x
Immediately after switching to
daylight savings, charging may occur
at the charging timer time set before
the switch to daylight savings until
the power switch is switched ON.
Edit
Function
Available setting
changes
Start Time
Select the desired charging
start time.
Time
(10-minute inter-
vals)
End Time
Select the desired charging
end time.
Time
(10-minute inter-
vals)
Repeat
Select the day(s) of the
week to repeat.
Monday
ʊ
Sun-
day
Charge Limit
Select the desired charge
limit method.
According to Bat-
tery Charge Level,
According to Esti-
mated Range
Battery Charge Level
*1
Select the desired maxi-
mum charge level.
100% ʊ 10%
(10 levels)
Estimated Range
*2
Select the desired estimat-
ed range.
In 10 km incre-
ments
*
1 Can be changed when According to Battery
Charge Level is selected for Charge Limit.
Use when you want to charge only the
amount of charging you need. This helps you
save power and prevent high voltage battery
deterioration.
*
2 Can be changed when According to
Estimated Range is selected for Charge
Limit.
Use when you want to charge according to
your planned driving distance.
The distance-to-full discharge changes
depending on the driving conditions and
surrounding environment. Check the actual
remaining distance-to-full discharge.
If you change the distance unit after setting
the Estimated Range, the Estimated Range
will be calculated in the unit after the
change. (If you change the units to miles
after setting the estimated range to 100 km,
the charge distance will be for 60 miles.)
NOTE
x
A charging day is set using Repeat
If 1 repeat day is set, charging is
repeated every week on the set day
of the week.
Depending on the set days of the
week, the Repeat indication is
displayed as Weekdays, Weekends,
and Daily. Otherwise, it is displayed
as Custom.
Setting example
Function
Available setting
changes
Start Time 21 : 00
End Time 6 : 00
Repeat Friday
Charge Limit
According to Bat-
tery Charge Level
Battery Charge Level 80 %
Before Driving
Electric Vehicles
3-27